STJH-CLEANROOM-RETURN-AIR-RISER-WALL-PANEL-1160-HEAVY-KEEL

Cleanroom Return-Air Riser Wall Panel 1160 mm Reinforced-Keel

Return-wall module with a thicker internal support keel.

Thicker frame differentiates this return-wall construction.
Continuous cavity carries air above the room.
Face-sheet options suit different enclosure finishes.

Introduction de produit

The 1160 mm construction uses a 0.8 mm keel behind its metal face. A continuous hollow riser replaces a room-side return column, with prefabricated components joined into the partition run.

Key Features

Thicker frame differentiates this return-wall construction.
Continuous cavity carries air above the room.
Face-sheet options suit different enclosure finishes.

Paramètres techniques

Width	1160 mm
Thickness	100 mm
Longueur maximale	6000 mm
Keel Gauge	0.8 mm
Facing Thickness	0.4–0.8 mm
Facing Material	Prepainted galvanized steel
Maximum Return Air	2300 m³/h
Channel	Hollow vertical riser
Installation	Flush modular partition
Customisation	Available to suit the actual return-air route and operating environment.

Applications

Higher-volume cleanroom return risers
Prefabricated pharmaceutical partitions

Solutions for Your Application

The return-wall frame needs a more substantial section.

A 0.8 mm internal keel supports the module.

A new return duct must not protrude into the work area.

The air channel remains within the 100 mm wall depth.

Options disponibles

Stainless steel outer sheet
PE or PVDF coating

Planning a Cleanroom Return-Air Riser Wall Panel 1160 mm Reinforced-Keel specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe