STJH-CLEANROOM-RETURN-AIR-RISER-WALL-PANEL-1160-HEAVY-KEEL

Cleanroom Return-Air Riser Wall Panel 1160 mm Reinforced-Keel

Return-wall module with a thicker internal support keel.

Thicker frame differentiates this return-wall construction.
Continuous cavity carries air above the room.
Face-sheet options suit different enclosure finishes.

견적 요청 제품 찾아보기

상품 소개

The 1160 mm construction uses a 0.8 mm keel behind its metal face. A continuous hollow riser replaces a room-side return column, with prefabricated components joined into the partition run.

주요 기능

Thicker frame differentiates this return-wall construction.
Continuous cavity carries air above the room.
Face-sheet options suit different enclosure finishes.

기술 매개변수

Width	1160 mm
Thickness	100 mm
최대 길이	6000 mm
Keel Gauge	0.8 mm
Facing Thickness	0.4–0.8 mm
Facing Material	Prepainted galvanized steel
Maximum Return Air	2300 m³/h
Channel	Hollow vertical riser
Installation	Flush modular partition
사용자 정의	Available to suit the actual return-air route and operating environment.

Applications

Higher-volume cleanroom return risers
Prefabricated pharmaceutical partitions

Solutions for Your Application

The return-wall frame needs a more substantial section.

A 0.8 mm internal keel supports the module.

A new return duct must not protrude into the work area.

The air channel remains within the 100 mm wall depth.

사용 가능한 옵션

Stainless steel outer sheet
PE or PVDF coating

Planning a Cleanroom Return-Air Riser Wall Panel 1160 mm Reinforced-Keel specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.