STJH-CLEANROOM-RETURN-AIR-RISER-WALL-PANEL-1160-HEAVY-KEEL

Cleanroom Return-Air Riser Wall Panel 1160 mm Reinforced-Keel

Return-wall module with a thicker internal support keel.

Thicker frame differentiates this return-wall construction.
Continuous cavity carries air above the room.
Face-sheet options suit different enclosure finishes.

Introdução do produto

The 1160 mm construction uses a 0.8 mm keel behind its metal face. A continuous hollow riser replaces a room-side return column, with prefabricated components joined into the partition run.

Características-chave

Thicker frame differentiates this return-wall construction.
Continuous cavity carries air above the room.
Face-sheet options suit different enclosure finishes.

Parâmetros técnicos

Width	1160 mm
Thickness	100 mm
Comprimento máximo	6000 mm
Keel Gauge	0.8 mm
Facing Thickness	0.4–0.8 mm
Facing Material	Prepainted galvanized steel
Maximum Return Air	2300 m³/h
Channel	Hollow vertical riser
Installation	Flush modular partition
Customização	Available to suit the actual return-air route and operating environment.

Applications

Higher-volume cleanroom return risers
Prefabricated pharmaceutical partitions

Solutions for Your Application

The return-wall frame needs a more substantial section.

A 0.8 mm internal keel supports the module.

A new return duct must not protrude into the work area.

The air channel remains within the 100 mm wall depth.

Opções disponíveis

Stainless steel outer sheet
PE or PVDF coating

Planning a Cleanroom Return-Air Riser Wall Panel 1160 mm Reinforced-Keel specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe