STJH-CLEANROOM-RETURN-AIR-RISER-WALL-PANEL-1160-HEAVY-KEEL

Cleanroom Return-Air Riser Wall Panel 1160 mm Reinforced-Keel

Return-wall module with a thicker internal support keel.

Thicker frame differentiates this return-wall construction.
Continuous cavity carries air above the room.
Face-sheet options suit different enclosure finishes.

مقدمة المنتج

The 1160 mm construction uses a 0.8 mm keel behind its metal face. A continuous hollow riser replaces a room-side return column, with prefabricated components joined into the partition run.

الخصائص الرئيسية

Thicker frame differentiates this return-wall construction.
Continuous cavity carries air above the room.
Face-sheet options suit different enclosure finishes.

المعلمات الفنية

Width	1160 mm
Thickness	100 mm
الحد الأقصى الطول	6000 mm
Keel Gauge	0.8 mm
Facing Thickness	0.4–0.8 mm
Facing Material	Prepainted galvanized steel
Maximum Return Air	2300 m³/h
Channel	Hollow vertical riser
Installation	Flush modular partition
التخصيص	Available to suit the actual return-air route and operating environment.

Applications

Higher-volume cleanroom return risers
Prefabricated pharmaceutical partitions

Solutions for Your Application

The return-wall frame needs a more substantial section.

A 0.8 mm internal keel supports the module.

A new return duct must not protrude into the work area.

The air channel remains within the 100 mm wall depth.

الخيارات المتاحة

Stainless steel outer sheet
PE or PVDF coating

Planning a Cleanroom Return-Air Riser Wall Panel 1160 mm Reinforced-Keel specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا