Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Dedicated wearing chemistry
The top seal is selected for chemical contact while the underlying screed supplies the required material depth.
STJH-CHEMICAL-RESISTANT-NOVOLAC-EPOXY-FLOORING-SCREED-46MM
Chemical-Resistant Novolac Epoxy Flooring 4–6 mm Novolac-Sealed Screed
A heavy epoxy screed finished with a novolac chemical-resistant face for areas combining mechanical loading and splash exposure.
- 4-6 mm epoxy screed body
- Novolac resin at the exposed face
- Layered construction for combined duties
About This Product
SCREED-46MM uses a conventional heavy-duty epoxy mortar body beneath a specialist novolac finishing layer. The 4-6 mm construction separates bulk load support from the chemistry of the exposed face. A high-build intermediate coat and aggregate treatment prepare the surface for the final seal. It is neither a thin novolac coating nor a mortar whose entire binder is novolac epoxy.
Key Features
Compacted industrial body
Trowelling consolidates the mortar beneath heavily used routes and allows local floor shape to be maintained.
Maintainable upper layer
Surface condition can be monitored and the compatible seal renewed before wear exposes the structural screed beneath.
Paramètres techniques
| Main Binder | Epoxy screed resin |
|---|---|
| Top-Seal Chemistry | Novolac epoxy |
| Nominal Thickness | 4-6 mm |
| Base Sequence | Primer and trowelled epoxy screed |
| Intermediate Finish | High-build epoxy coat |
| Surface Aggregate | 0.5 mm aluminum-oxide broadcast |
| Final Appearance | Gloss sealed traction surface |
| Placement | Hand or power trowel; roller-applied seal |
| Duty | Heavy industrial traffic with chemical exposure |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Applications
Suitable for chemical mixing support, pharmaceutical manufacturing and heavily trafficked storage rooms. Pay particular attention to turning points, spill locations and drain approaches, where both wear and chemical contact may concentrate on the same area.
Solutions for Your Application
A thin chemical coating cannot provide the necessary repair body.
Use the heavy screed beneath the novolac surface layer.
Chemical handling resumes as soon as the floor accepts foot traffic.
Keep chemical service separate from pedestrian reopening and allow the finishing layer to reach its temperature-dependent chemical cure.
Options disponibles
Choose colour, cove height and the chemical-compatible finishing package. Keep the complete surface sequence intact so a general epoxy maintenance coat does not replace the selected chemical-contact face.
Planning a Chemical-Resistant Novolac Epoxy Flooring 4–6 mm Novolac-Sealed Screed specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
