STJH SCREED-46MM flooring sample with a sealed textured novolac face above a thick epoxy mortar edge on white

STJH-CHEMICAL-RESISTANT-NOVOLAC-EPOXY-FLOORING-SCREED-46MM

Chemical-Resistant Novolac Epoxy Flooring 4–6 mm Novolac-Sealed Screed

A heavy epoxy screed finished with a novolac chemical-resistant face for areas combining mechanical loading and splash exposure.

4-6 mm epoxy screed body
Novolac resin at the exposed face
Layered construction for combined duties

Permintaan untuk kutipan Browse Produk

About This Product

SCREED-46MM uses a conventional heavy-duty epoxy mortar body beneath a specialist novolac finishing layer. The 4-6 mm construction separates bulk load support from the chemistry of the exposed face. A high-build intermediate coat and aggregate treatment prepare the surface for the final seal. It is neither a thin novolac coating nor a mortar whose entire binder is novolac epoxy.

Fitur utama:

Dedicated wearing chemistry

The top seal is selected for chemical contact while the underlying screed supplies the required material depth.

Compacted industrial body

Trowelling consolidates the mortar beneath heavily used routes and allows local floor shape to be maintained.

Maintainable upper layer

Surface condition can be monitored and the compatible seal renewed before wear exposes the structural screed beneath.

Parameter teknis

Main Binder	Epoxy screed resin
Top-Seal Chemistry	Novolac epoxy
Nominal Thickness	4-6 mm
Base Sequence	Primer and trowelled epoxy screed
Intermediate Finish	High-build epoxy coat
Surface Aggregate	0.5 mm aluminum-oxide broadcast
Final Appearance	Gloss sealed traction surface
Placement	Hand or power trowel; roller-applied seal
Duty	Heavy industrial traffic with chemical exposure
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Applications

Suitable for chemical mixing support, pharmaceutical manufacturing and heavily trafficked storage rooms. Pay particular attention to turning points, spill locations and drain approaches, where both wear and chemical contact may concentrate on the same area.

Solutions for Your Application

A thin chemical coating cannot provide the necessary repair body.

Use the heavy screed beneath the novolac surface layer.

Chemical handling resumes as soon as the floor accepts foot traffic.

Keep chemical service separate from pedestrian reopening and allow the finishing layer to reach its temperature-dependent chemical cure.

Pilihan yang tersedia

Choose colour, cove height and the chemical-compatible finishing package. Keep the complete surface sequence intact so a general epoxy maintenance coat does not replace the selected chemical-contact face.

Planning a Chemical-Resistant Novolac Epoxy Flooring 4–6 mm Novolac-Sealed Screed specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami