STJH-CLEANROOM-ALUMINUM-PROFILE-F45X35

Cleanroom Aluminum Extrusion Profile 45 x 35 mm F-Section

An asymmetric F-section aluminum extrusion for shaped cleanroom panel interfaces.

The F outline places both arms on one side of the stem.
A 45 x 35 mm envelope gives a substantial interface section.
Aluminum extrusion produces clean, straight longitudinal edges.

مقدمة المنتج

This 45 x 35 mm profile uses a main stem and two projecting arms to form an F outline. The unequal geometry provides an interface that differs from a double-sided H receiver, making section selection important when matching a panel return.

الخصائص الرئيسية

The F outline places both arms on one side of the stem.
A 45 x 35 mm envelope gives a substantial interface section.
Aluminum extrusion produces clean, straight longitudinal edges.

المعلمات الفنية

Section Dimension A	45 mm
Section Dimension B	35 mm
Base Material	Aluminum
Cross-Section	F shape
Fabrication	Extruded
Arm Arrangement	Two arms on one side
Symmetry	Asymmetric
Supply Form	Linear section
Length Selection	Cut lengths available
التخصيص	متوفر على أساس التطبيق المقصود وبيئة التشغيل.

Applications

Cleanroom panel return interfaces
Asymmetric modular trim connections

Solutions for Your Application

A symmetrical receiver occupies the wrong side of the joint.

The F-shaped section concentrates its projecting arms on one side.

The profile must align along a straight panel edge.

The continuous extrusion creates a uniform longitudinal reference.

الخيارات المتاحة

Required section lengths
Surface finish selection

Planning a Cleanroom Aluminum Extrusion Profile 45 x 35 mm F-Section specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا