STJH-CLEANROOM-ALUMINUM-PROFILE-F45X35

Cleanroom Aluminum Extrusion Profile 45 x 35 mm F-Section

An asymmetric F-section aluminum extrusion for shaped cleanroom panel interfaces.

The F outline places both arms on one side of the stem.
A 45 x 35 mm envelope gives a substantial interface section.
Aluminum extrusion produces clean, straight longitudinal edges.

Введение продукции

This 45 x 35 mm profile uses a main stem and two projecting arms to form an F outline. The unequal geometry provides an interface that differs from a double-sided H receiver, making section selection important when matching a panel return.

Основные характеристики

The F outline places both arms on one side of the stem.
A 45 x 35 mm envelope gives a substantial interface section.
Aluminum extrusion produces clean, straight longitudinal edges.

Технические параметры

Section Dimension A	45 mm
Section Dimension B	35 mm
Base Material	Aluminum
Cross-Section	F shape
Fabrication	Extruded
Arm Arrangement	Two arms on one side
Symmetry	Asymmetric
Supply Form	Linear section
Length Selection	Cut lengths available
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Applications

Cleanroom panel return interfaces
Asymmetric modular trim connections

Solutions for Your Application

A symmetrical receiver occupies the wrong side of the joint.

The F-shaped section concentrates its projecting arms on one side.

The profile must align along a straight panel edge.

The continuous extrusion creates a uniform longitudinal reference.

Доступные варианты

Required section lengths
Surface finish selection

Planning a Cleanroom Aluminum Extrusion Profile 45 x 35 mm F-Section specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой