STJH-CLEANROOM-ALUMINUM-PROFILE-F45X35

Cleanroom Aluminum Extrusion Profile 45 x 35 mm F-Section

An asymmetric F-section aluminum extrusion for shaped cleanroom panel interfaces.

The F outline places both arms on one side of the stem.
A 45 x 35 mm envelope gives a substantial interface section.
Aluminum extrusion produces clean, straight longitudinal edges.

견적 요청 제품 찾아보기

상품 소개

This 45 x 35 mm profile uses a main stem and two projecting arms to form an F outline. The unequal geometry provides an interface that differs from a double-sided H receiver, making section selection important when matching a panel return.

주요 기능

The F outline places both arms on one side of the stem.
A 45 x 35 mm envelope gives a substantial interface section.
Aluminum extrusion produces clean, straight longitudinal edges.

기술 매개변수

Section Dimension A	45 mm
Section Dimension B	35 mm
Base Material	Aluminum
Cross-Section	F shape
Fabrication	Extruded
Arm Arrangement	Two arms on one side
Symmetry	Asymmetric
Supply Form	Linear section
Length Selection	Cut lengths available
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

Cleanroom panel return interfaces
Asymmetric modular trim connections

Solutions for Your Application

A symmetrical receiver occupies the wrong side of the joint.

The F-shaped section concentrates its projecting arms on one side.

The profile must align along a straight panel edge.

The continuous extrusion creates a uniform longitudinal reference.

사용 가능한 옵션

Required section lengths
Surface finish selection

Planning a Cleanroom Aluminum Extrusion Profile 45 x 35 mm F-Section specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.