STjh miniature 300 mm square stainless ULPA FFU with compact fan grille and sealed filter frame

STJH-STAINLESS-STEEL-FFU-300X300-ULPA

Fan Filter Unit 300 × 300 mm Stainless Steel ULPA

A miniature stainless steel ULPA FFU for gloveboxes, isolators and small ultra-clean enclosures.

300 x 300 mm miniature footprint
304 stainless steel housing and frame
ULPA efficiency of 99.999% at 0.12 µm

Giới thiệu Sản phẩm

This 300 mm square fan filter unit packages ULPA filtration in a compact 304 stainless steel housing approximately 216 mm high. Its small footprint is intended for enclosed tools and localized work volumes rather than room-scale ceiling coverage. The cleanable metal construction is useful where a compact module must tolerate regular wipe-down while preserving a high-efficiency final filter face.

Các tính năng chính

Tool-scale format

The small square face fits isolators, gloveboxes and equipment enclosures that cannot accept a conventional ceiling FFU.

Cleanable stainless construction

A 304 stainless housing and filter frame support frequent surface wipe-down around controlled processes.

ULPA final stage

The cited 99.999% efficiency at 0.12 µm is intended for ultra-clean localized supply applications.

Thông số kỹ thuật

Nominal Module Size	300 x 300 mm
Approximate Module Height	216 mm
Housing Material	304 stainless steel
Filter Frame Material	304 stainless steel
Final Filter	ULPA
Reference Filter Efficiency	99.999% at 0.12 µm
Airflow Direction	Fan-driven supply through the ULPA filter face
Installation	Isolator, glovebox or equipment-enclosure mounting
Service Configuration	Access arranged around the compact enclosure interface
Tùy chỉnh	Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động.

Applications

Designed for small isolators, gloveboxes, analytical enclosures and localized ultra-clean process chambers. Airflow and mounting details should be matched to the enclosure volume, leakage rate and required internal pressure direction.

Solutions for Your Application

A standard 600 mm FFU is too large for the equipment enclosure.Use the 300 mm square module to place ULPA-filtered supply directly over the compact controlled volume.

Painted housings are difficult to clean around a sensitive tool.Specify the 304 stainless exterior and compatible seals for the intended wipe-down method.

Các tùy chọn có sẵn

Confirm enclosure opening, voltage, fan control, ULPA seal and service direction. Final airflow must be selected for the actual enclosure pressure and leakage conditions.

Planning a Fan Filter Unit 300 × 300 mm Stainless Steel ULPA specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi