STjh miniature 300 mm square stainless ULPA FFU with compact fan grille and sealed filter frame

STJH-STAINLESS-STEEL-FFU-300X300-ULPA

Fan Filter Unit 300 × 300 mm Stainless Steel ULPA

A miniature stainless steel ULPA FFU for gloveboxes, isolators and small ultra-clean enclosures.

300 x 300 mm miniature footprint
304 stainless steel housing and frame
ULPA efficiency of 99.999% at 0.12 µm

견적 요청 제품 찾아보기

상품 소개

This 300 mm square fan filter unit packages ULPA filtration in a compact 304 stainless steel housing approximately 216 mm high. Its small footprint is intended for enclosed tools and localized work volumes rather than room-scale ceiling coverage. The cleanable metal construction is useful where a compact module must tolerate regular wipe-down while preserving a high-efficiency final filter face.

주요 기능

Tool-scale format

The small square face fits isolators, gloveboxes and equipment enclosures that cannot accept a conventional ceiling FFU.

Cleanable stainless construction

A 304 stainless housing and filter frame support frequent surface wipe-down around controlled processes.

ULPA final stage

The cited 99.999% efficiency at 0.12 µm is intended for ultra-clean localized supply applications.

기술 매개변수

Nominal Module Size	300 x 300 mm
Approximate Module Height	216 mm
Housing Material	304 stainless steel
Filter Frame Material	304 stainless steel
Final Filter	ULPA
Reference Filter Efficiency	99.999% at 0.12 µm
Airflow Direction	Fan-driven supply through the ULPA filter face
Installation	Isolator, glovebox or equipment-enclosure mounting
Service Configuration	Access arranged around the compact enclosure interface
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

Designed for small isolators, gloveboxes, analytical enclosures and localized ultra-clean process chambers. Airflow and mounting details should be matched to the enclosure volume, leakage rate and required internal pressure direction.

Solutions for Your Application

A standard 600 mm FFU is too large for the equipment enclosure.Use the 300 mm square module to place ULPA-filtered supply directly over the compact controlled volume.

Painted housings are difficult to clean around a sensitive tool.Specify the 304 stainless exterior and compatible seals for the intended wipe-down method.

사용 가능한 옵션

Confirm enclosure opening, voltage, fan control, ULPA seal and service direction. Final airflow must be selected for the actual enclosure pressure and leakage conditions.

Planning a Fan Filter Unit 300 × 300 mm Stainless Steel ULPA specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.