STJH-SEPARATOR-HEPA-H13-610X610X150

Separator HEPA Filter 610 × 610 × 150 mm H13

A six-inch full-module H13 separator filter for final filtration where bank depth is restricted.

150 mm shallow separator box
H13 final filtration
Standard and high-capacity duties

Giới thiệu Sản phẩm

This 610 × 610 × 150 mm H13 filter uses microglass media folded around aluminum separators. In its standard configuration it delivers 1031 m3/h at a 250 Pa initial resistance; the documented high-capacity selection reaches 1626 m3/h at 350 Pa. Its six-inch box is intended for built-up banks and clean-process AHUs that cannot accept a full-depth separator pack.

Các tính năng chính

Depth-limited HEPA solution

The 150 mm cell provides a traditional separated pack in filter sections that lack room for a 290 mm box.

Two airflow selections

Standard and high-capacity duties allow pressure and airflow to be balanced within the same external size.

Aluminum-separated pleats

Corrugated separators maintain airflow passages through the microglass pack.

Thông số kỹ thuật

External Dimensions	610 × 610 × 150 mm
Efficiency Class	H13
Filter Medium	Microglass fiber
Pleat Separators	Aluminum
Standard Airflow	1031 m3/h
Standard Initial Resistance	250 Pa
High-Capacity Airflow	1626 m3/h
High-Capacity Initial Resistance	350 Pa
Housing Depth	150 mm six-inch class
Tùy chỉnh	Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động.

Applications

Used for final filtration in depth-constrained clean-process AHUs, built-up filter banks and controlled manufacturing supply systems. Airflow selection must match the available fan pressure and the expected loaded-filter operating point.

Solutions for Your Application

The HEPA bank has only six inches of available filter depth.The 150 mm separator cell fits the shallow section while retaining a full 610 mm face.

Higher airflow is required from the same opening but fan pressure is limited.Compare the 1031 m3/h at 250 Pa standard duty with the 1626 m3/h at 350 Pa high-capacity selection before sizing.

Các tùy chọn có sẵn

Specify airflow duty, frame material, gasket location, faceguard and compatible clamping arrangement for the receiving bank.

Planning a Separator HEPA Filter 610 × 610 × 150 mm H13 specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi