İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Electrical function through the body
The conductive material is distributed through the wearing section, rather than relying solely on a temporary treatment applied after the floor has been laid.
STJH-ELECTROSTATIC-CONDUCTIVE-PVC-FLOORING-CS20
Electrostatic-Conductive PVC Flooring Carbon-Encapsulated Sheet
A full-depth carbon-granule conductive sheet for broad ESD areas where welded roll coverage is preferred.
- Carbon-encapsulated granule network
- 10^4–10^6 ohm conductive selection band
- Weldable continuous roll format
About This Product
Carbon-encapsulated granules form the electrical network throughout this 2 mm homogeneous vinyl sheet. The configuration targets the conductive resistance band of 10^4 to 10^6 ohms using the relevant floor test method, and it is installed as a grounded system. Its roll format is useful for wide electronics bays where the floor should remain continuous around workstations and mobile production equipment.
Ana Özellikler
Welded working surface
Joined sheets provide a cleanable field around fixed benches. Plan the joints before installation so narrow strips do not create unnecessary maintenance edges.
Deliberate resistance selection
The conductive band serves equipment areas with a defined low-resistance floor requirement. It should not be substituted automatically for a higher-resistance dissipative specification.
Teknik parametreler
| Sheet Construction | Homogeneous conductive PVC |
|---|---|
| Nominal Thickness | 2 mm |
| Electrical Network | Carbon-encapsulated granules |
| Selection Resistance Range | 10^4–10^6 Ω |
| Product Format | Continuous roll sheet |
| Seams | Heat welded |
| Backing Function | Conductive backing |
| Installation System | Grounded adhesive-bonded floor |
| Finish Care | Compatible ESD cleaning procedure |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Applications
Suitable for electronics production bays and technical clinical support areas specifying conductive sheet flooring. Resistance measurements must use the stated method and conditions because different tests describe different paths through the installation. Personnel protection and device protection are considered together when selecting footwear and the earthing arrangement.
Solutions for Your Application
A dissipative product is offered where a conductive band was specified.
Compare the actual resistance range and test method, not only the word antistatic on a product description.
Small infill strips introduce many joints around workstations.
Develop the roll layout around fixed equipment footprints and form clean, accessible seams at planned locations.
Mevcut Seçenekler
Choose the sheet colour and matching weld material, then define the conductive adhesive and earth connection arrangement. Keep repair pieces compatible with the same electrical construction so later local repairs preserve the intended network.
Planning a Electrostatic-Conductive PVC Flooring Carbon-Encapsulated Sheet specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
