Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Electrical function through the body
The conductive material is distributed through the wearing section, rather than relying solely on a temporary treatment applied after the floor has been laid.
STJH-ELECTROSTATIC-CONDUCTIVE-PVC-FLOORING-CS20
Electrostatic-Conductive PVC Flooring Carbon-Encapsulated Sheet
A full-depth carbon-granule conductive sheet for broad ESD areas where welded roll coverage is preferred.
- Carbon-encapsulated granule network
- 10^4–10^6 ohm conductive selection band
- Weldable continuous roll format
About This Product
Carbon-encapsulated granules form the electrical network throughout this 2 mm homogeneous vinyl sheet. The configuration targets the conductive resistance band of 10^4 to 10^6 ohms using the relevant floor test method, and it is installed as a grounded system. Its roll format is useful for wide electronics bays where the floor should remain continuous around workstations and mobile production equipment.
Características-chave
Welded working surface
Joined sheets provide a cleanable field around fixed benches. Plan the joints before installation so narrow strips do not create unnecessary maintenance edges.
Deliberate resistance selection
The conductive band serves equipment areas with a defined low-resistance floor requirement. It should not be substituted automatically for a higher-resistance dissipative specification.
Parâmetros técnicos
| Sheet Construction | Homogeneous conductive PVC |
|---|---|
| Nominal Thickness | 2 mm |
| Electrical Network | Carbon-encapsulated granules |
| Selection Resistance Range | 10^4–10^6 Ω |
| Product Format | Continuous roll sheet |
| Seams | Heat welded |
| Backing Function | Conductive backing |
| Installation System | Grounded adhesive-bonded floor |
| Finish Care | Compatible ESD cleaning procedure |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Applications
Suitable for electronics production bays and technical clinical support areas specifying conductive sheet flooring. Resistance measurements must use the stated method and conditions because different tests describe different paths through the installation. Personnel protection and device protection are considered together when selecting footwear and the earthing arrangement.
Solutions for Your Application
A dissipative product is offered where a conductive band was specified.
Compare the actual resistance range and test method, not only the word antistatic on a product description.
Small infill strips introduce many joints around workstations.
Develop the roll layout around fixed equipment footprints and form clean, accessible seams at planned locations.
Opções disponíveis
Choose the sheet colour and matching weld material, then define the conductive adhesive and earth connection arrangement. Keep repair pieces compatible with the same electrical construction so later local repairs preserve the intended network.
Planning a Electrostatic-Conductive PVC Flooring Carbon-Encapsulated Sheet specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
