STJH carbon-encapsulated conductive PVC flooring roll sample with visible granule pattern and exposed edge on white

STJH-ELECTROSTATIC-CONDUCTIVE-PVC-FLOORING-CS20

Electrostatic-Conductive PVC Flooring Carbon-Encapsulated Sheet

A full-depth carbon-granule conductive sheet for broad ESD areas where welded roll coverage is preferred.

Carbon-encapsulated granule network
10^4–10^6 ohm conductive selection band
Weldable continuous roll format

견적 요청 제품 찾아보기

About This Product

Carbon-encapsulated granules form the electrical network throughout this 2 mm homogeneous vinyl sheet. The configuration targets the conductive resistance band of 10^4 to 10^6 ohms using the relevant floor test method, and it is installed as a grounded system. Its roll format is useful for wide electronics bays where the floor should remain continuous around workstations and mobile production equipment.

주요 기능

Electrical function through the body

The conductive material is distributed through the wearing section, rather than relying solely on a temporary treatment applied after the floor has been laid.

Welded working surface

Joined sheets provide a cleanable field around fixed benches. Plan the joints before installation so narrow strips do not create unnecessary maintenance edges.

Deliberate resistance selection

The conductive band serves equipment areas with a defined low-resistance floor requirement. It should not be substituted automatically for a higher-resistance dissipative specification.

기술 매개변수

Sheet Construction	Homogeneous conductive PVC
Nominal Thickness	2 mm
Electrical Network	Carbon-encapsulated granules
Selection Resistance Range	10^4–10^6 Ω
Product Format	Continuous roll sheet
Seams	Heat welded
Backing Function	Conductive backing
Installation System	Grounded adhesive-bonded floor
Finish Care	Compatible ESD cleaning procedure
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

Suitable for electronics production bays and technical clinical support areas specifying conductive sheet flooring. Resistance measurements must use the stated method and conditions because different tests describe different paths through the installation. Personnel protection and device protection are considered together when selecting footwear and the earthing arrangement.

Solutions for Your Application

A dissipative product is offered where a conductive band was specified.

Compare the actual resistance range and test method, not only the word antistatic on a product description.

Small infill strips introduce many joints around workstations.

Develop the roll layout around fixed equipment footprints and form clean, accessible seams at planned locations.

사용 가능한 옵션

Choose the sheet colour and matching weld material, then define the conductive adhesive and earth connection arrangement. Keep repair pieces compatible with the same electrical construction so later local repairs preserve the intended network.

Planning a Electrostatic-Conductive PVC Flooring Carbon-Encapsulated Sheet specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.