STJH carbon-encapsulated conductive PVC flooring roll sample with visible granule pattern and exposed edge on white

STJH-ELECTROSTATIC-CONDUCTIVE-PVC-FLOORING-CS20

Electrostatic-Conductive PVC Flooring Carbon-Encapsulated Sheet

A full-depth carbon-granule conductive sheet for broad ESD areas where welded roll coverage is preferred.

Carbon-encapsulated granule network
10^4–10^6 ohm conductive selection band
Weldable continuous roll format

About This Product

Carbon-encapsulated granules form the electrical network throughout this 2 mm homogeneous vinyl sheet. The configuration targets the conductive resistance band of 10^4 to 10^6 ohms using the relevant floor test method, and it is installed as a grounded system. Its roll format is useful for wide electronics bays where the floor should remain continuous around workstations and mobile production equipment.

Основные характеристики

Electrical function through the body

The conductive material is distributed through the wearing section, rather than relying solely on a temporary treatment applied after the floor has been laid.

Welded working surface

Joined sheets provide a cleanable field around fixed benches. Plan the joints before installation so narrow strips do not create unnecessary maintenance edges.

Deliberate resistance selection

The conductive band serves equipment areas with a defined low-resistance floor requirement. It should not be substituted automatically for a higher-resistance dissipative specification.

Технические параметры

Sheet Construction	Homogeneous conductive PVC
Nominal Thickness	2 mm
Electrical Network	Carbon-encapsulated granules
Selection Resistance Range	10^4–10^6 Ω
Product Format	Continuous roll sheet
Seams	Heat welded
Backing Function	Conductive backing
Installation System	Grounded adhesive-bonded floor
Finish Care	Compatible ESD cleaning procedure
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Applications

Suitable for electronics production bays and technical clinical support areas specifying conductive sheet flooring. Resistance measurements must use the stated method and conditions because different tests describe different paths through the installation. Personnel protection and device protection are considered together when selecting footwear and the earthing arrangement.

Solutions for Your Application

A dissipative product is offered where a conductive band was specified.

Compare the actual resistance range and test method, not only the word antistatic on a product description.

Small infill strips introduce many joints around workstations.

Develop the roll layout around fixed equipment footprints and form clean, accessible seams at planned locations.

Доступные варианты

Choose the sheet colour and matching weld material, then define the conductive adhesive and earth connection arrangement. Keep repair pieces compatible with the same electrical construction so later local repairs preserve the intended network.

Planning a Electrostatic-Conductive PVC Flooring Carbon-Encapsulated Sheet specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой