İngilizce
Portekizce
İspanyolca
Malay dilinde
Endonezya dilinde
Almanca
TürkçeCurrent
Vietnamca
Fransızca
Rusça
Arapça
Taylandca
Japonca
Korece
Temiz Oda Duvar ve Tavan Sistemleri
İç 90 Derece Temiz Oda Köşesi Profili
A square internal aluminum connector that aligns two modular cleanroom panels at 90 degrees where a compact corner is preferred over radiused coving.
- True square 90-degree geometry
- Dual panel-receiving channels
- Concealed mechanical fixing
- Compact internal corner footprint
Ürün tanıtımı
The Internal 90-Degree Cleanroom Corner Profile forms a rigid square junction between two perpendicular modular wall panels. Its L-shaped extrusion locates both panel edges, protects the cut interfaces and provides a controlled line for sealing. The compact geometry suits equipment alcoves, service spaces and partition layouts where a large hygienic cove would take up useful clearance. Anodized or powder-coated surfaces coordinate the connector with adjacent panels and simplify routine cleaning.
Ana Özellikler
The profile covers raw panel edges inside the corner assembly.
Concealed screw paths keep primary fasteners away from the visible wall face.
A narrow corner footprint preserves space in compact rooms and recesses.
Continuous sealing lines can be applied at both panel-to-profile interfaces.
Uygulamanız için çözümler
A square internal junction must hold two panels accurately while hiding their cut edges and leaving a controlled sealing path.
Two free panel edges can drift out of square during assembly.The rigid L-shaped extrusion locates both edges in a defined 90-degree relationship.
Exposed sandwich-panel cut edges are difficult to finish neatly inside a corner.Twin receiving faces enclose the panel ends behind the aluminum profile.
Bulky rounded coving reduces clearance in narrow technical spaces.The compact square section retains more usable room at the junction.
An uneven corner gap makes a continuous sealant bead hard to apply.Straight extrusion edges establish consistent seal lines along both wall faces.
Tipik uygulamalar
Cleanroom partition internal cornersEquipment and utility alcovesService corridor wall junctionsCompact laboratory enclosuresRetrofit modular wall returns
Teknik parametreler
This is a structural square-corner connector, not a radiused internal cove. Section dimensions are matched to the selected modular wall thickness.
| Temel malzemeler | 6063-T5 extruded aluminum L-shaped corner connector |
|---|---|
| Panel kalınlığı | 50, 75 or 100 mm compatible panel thickness |
| Effective Width (Etkili Genişlik) | N/A — defined by two perpendicular panel-receiving channels |
| Maksimum uzunluk | 6000 mm |
| Çelik yüz yüze kalınlığı | N/A — the connector is extruded aluminum |
| Core Density (Çekirdek Yoğunluğu) | N/a-yalıtılmış çekirdek yok; alüminyum alaşımlı yoğunluk yaklaşık 2700 kg/m³ |
| Termal İletkenlik | N/a-yalıtılmış çekirdek yok; alüminyum alaşımı yaklaşık 200 w/(m · k) |
| Yüzey bitirme | Anodized or polyester powder-coated aluminum |
| Ortak tip | Internal 90-degree twin-channel connection with concealed screws and sealed edges |
| Customization (Özelleşme) | Kullanılan amaçlanan uygulama ve çalışma ortamına göre kullanılabilir |
Mevcut Seçenekler
Profile for 50 mm wall panelsProfile for 75 mm wall panelsProfile for 100 mm wall panelsAnodized or white powder-coated surface
Planning a Internal 90-Degree Cleanroom Corner Profile specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
