Inglés
El portugués
EspañolCurrent
El malayo
Idioma indonesio
Alemán
El turco
El vietnamita
Francés
El ruso
El árabe
Tailandés
El japonés
Coreano
Sistemas de pared y techo de sala limpia
Perfil interno de esquina de sala limpia de 90 grados
A square internal aluminum connector that aligns two modular cleanroom panels at 90 degrees where a compact corner is preferred over radiused coving.
- True square 90-degree geometry
- Dual panel-receiving channels
- Concealed mechanical fixing
- Compact internal corner footprint
Introducción del producto
The Internal 90-Degree Cleanroom Corner Profile forms a rigid square junction between two perpendicular modular wall panels. Its L-shaped extrusion locates both panel edges, protects the cut interfaces and provides a controlled line for sealing. The compact geometry suits equipment alcoves, service spaces and partition layouts where a large hygienic cove would take up useful clearance. Anodized or powder-coated surfaces coordinate the connector with adjacent panels and simplify routine cleaning.
Características clave
The profile covers raw panel edges inside the corner assembly.
Concealed screw paths keep primary fasteners away from the visible wall face.
A narrow corner footprint preserves space in compact rooms and recesses.
Continuous sealing lines can be applied at both panel-to-profile interfaces.
Soluciones para su aplicación
A square internal junction must hold two panels accurately while hiding their cut edges and leaving a controlled sealing path.
Two free panel edges can drift out of square during assembly.The rigid L-shaped extrusion locates both edges in a defined 90-degree relationship.
Exposed sandwich-panel cut edges are difficult to finish neatly inside a corner.Twin receiving faces enclose the panel ends behind the aluminum profile.
Bulky rounded coving reduces clearance in narrow technical spaces.The compact square section retains more usable room at the junction.
An uneven corner gap makes a continuous sealant bead hard to apply.Straight extrusion edges establish consistent seal lines along both wall faces.
Aplicaciones típicas
Cleanroom partition internal cornersEquipment and utility alcovesService corridor wall junctionsCompact laboratory enclosuresRetrofit modular wall returns
Parámetros técnicos
This is a structural square-corner connector, not a radiused internal cove. Section dimensions are matched to the selected modular wall thickness.
| Materiales Core | 6063-T5 extruded aluminum L-shaped corner connector |
|---|---|
| Panel de espesor | 50, 75 or 100 mm compatible panel thickness |
| Ancho efectivo | N/A — defined by two perpendicular panel-receiving channels |
| Longitud máxima | 6000 mm |
| Acero frente a espesor | N/A — the connector is extruded aluminum |
| Densidad Core | N/A: núcleo sin aislamiento; la densidad de la aleación de aluminio es de aproximadamente 2700 kg/m³ |
| Conductividad térmica | N/A: núcleo sin aislamiento; la aleación de aluminio es de aproximadamente 200 W/(m · K) |
| Superficie acabada | Anodized or polyester powder-coated aluminum |
| Tipo conjunto | Internal 90-degree twin-channel connection with concealed screws and sealed edges |
| Customization | Disponible según la aplicación prevista y el entorno operativo |
Opciones disponibles
Profile for 50 mm wall panelsProfile for 75 mm wall panelsProfile for 100 mm wall panelsAnodized or white powder-coated surface
Planning a Internal 90-Degree Cleanroom Corner Profile specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
