Dinding bilik bersih dan sistem siling

Profil sudut bilik bersih dalaman 90 darjah

A square internal aluminum connector that aligns two modular cleanroom panels at 90 degrees where a compact corner is preferred over radiused coving.

True square 90-degree geometry
Dual panel-receiving channels
Concealed mechanical fixing
Compact internal corner footprint

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The Internal 90-Degree Cleanroom Corner Profile forms a rigid square junction between two perpendicular modular wall panels. Its L-shaped extrusion locates both panel edges, protects the cut interfaces and provides a controlled line for sealing. The compact geometry suits equipment alcoves, service spaces and partition layouts where a large hygienic cove would take up useful clearance. Anodized or powder-coated surfaces coordinate the connector with adjacent panels and simplify routine cleaning.

Ciri-ciri Utama

Perpendicular receiving faces hold adjoining panels at a consistent right angle.

The profile covers raw panel edges inside the corner assembly.

Concealed screw paths keep primary fasteners away from the visible wall face.

A narrow corner footprint preserves space in compact rooms and recesses.

Continuous sealing lines can be applied at both panel-to-profile interfaces.

Penyelesaian untuk permohonan anda

A square internal junction must hold two panels accurately while hiding their cut edges and leaving a controlled sealing path.

Two free panel edges can drift out of square during assembly.The rigid L-shaped extrusion locates both edges in a defined 90-degree relationship.

Exposed sandwich-panel cut edges are difficult to finish neatly inside a corner.Twin receiving faces enclose the panel ends behind the aluminum profile.

Bulky rounded coving reduces clearance in narrow technical spaces.The compact square section retains more usable room at the junction.

An uneven corner gap makes a continuous sealant bead hard to apply.Straight extrusion edges establish consistent seal lines along both wall faces.

Permohonan yang biasa

Cleanroom partition internal cornersEquipment and utility alcovesService corridor wall junctionsCompact laboratory enclosuresRetrofit modular wall returns

Parameter teknikal

This is a structural square-corner connector, not a radiused internal cove. Section dimensions are matched to the selected modular wall thickness.

Bahan Teras	6063-T5 extruded aluminum L-shaped corner connector
Ketebalan Panel	50, 75 or 100 mm compatible panel thickness
Lebar berkesan	N/A — defined by two perpendicular panel-receiving channels
Panjang maksimum	6000 mm
Keluli Menghadapi Ketebalan	N/A — the connector is extruded aluminum
Ketumpatan teras	N/A-tiada teras terlindung; Ketumpatan aloi aluminium adalah kira-kira 2700 kg/m³
Kekonduksian Terma	N/A-tiada teras terlindung; Aloi aluminium adalah kira-kira 200 W/(m · K)
Kemasan permukaan	Anodized or polyester powder-coated aluminum
Jenis Bersatu	Internal 90-degree twin-channel connection with concealed screws and sealed edges
Penyesuaian	Terdapat berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi

Pilihan yang boleh didapati

Profile for 50 mm wall panelsProfile for 75 mm wall panelsProfile for 100 mm wall panelsAnodized or white powder-coated surface

Planning a Internal 90-Degree Cleanroom Corner Profile specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami