STJH 65 percent open steel grate access-floor panel with epoxy-coated bars and complete square frame on white

STJH-PERFORATED-STEEL-RAISED-ACCESS-FLOOR-AF65

Perforated Steel Raised Access Floor 65% Open-Area Grate

A high-open steel grate for technical floor positions needing a broad localized air-delivery path.

65% ventilation opening area
600 x 600 x 35 mm module
Epoxy-coated all-steel grate

About This Product

The AF65 panel uses an all-steel grate construction with 65% ventilation opening area in a 600 x 600 x 35 mm module. An epoxy coating protects the steel surface. The open geometry is materially different from a round-hole perforated top sheet and is selected for locations where a large free cross-section is needed within a limited number of floor modules.

主要な特徴

High-open grate geometry

The broad openings create a large airflow route through the module. This geometry should be considered when selecting footwear, cleaning methods and the position of small equipment feet.

Compact modular depth

The 35 mm panel body supports integration into a compatible raised-floor layout. Verify seating and finished height at neighbouring solid panels rather than matching footprint alone.

Protected steel surface

The epoxy finish separates the steel from routine environmental exposure. Inspect coating condition after handling, particularly on edges and contact areas used during panel removal.

技術的なパラメータ

Module Dimensions	600 x 600 mm
パネルの厚さ	35 mm
Panel Material	All-steel grate
Open Area	65%
Protective Finish	Epoxy coating
Concentrated-Load Reference	500 kg nominal manufacturer rating
Ventilation Function	Localized high-open airflow route
Panel Access	Removable module
Installation	Compatible raised-floor support grid
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

Applications

Use in high-heat-load technical bays and dense equipment rows where the floor ventilation design calls for a high-open module. Open area is not the same as delivered airflow; the available plenum pressure and nearby obstructions control actual output. Check equipment contact geometry and do not interpret a concentrated-load rating as a repeated rolling-load rating.

Solutions for Your Application

Too few floor positions are available for the required air path.

Select the high-open grate at suitable locations and check the full underfloor route for restrictions before increasing the number of openings.

Small feet or wheels contact the edges of the grate openings.

Keep incompatible equipment contacts on suitable solid supports or separately evaluated traffic routes instead of relying on open-area percentage alone.

利用可能なオプション

Specify coating colour and the compatible support arrangement. Plan transitions to solid equipment zones and retain lifting access so the grate and the air path beneath it can be cleaned without dismantling adjacent equipment.

Planning a Perforated Steel Raised Access Floor 65% Open-Area Grate specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する