STJH 2 mm electrostatic-dissipative rubber flooring sample partly curled to show its dense solid sheet body on white

STJH-CLEANROOM-RUBBER-SHEET-FLOORING-ED20

Cleanroom Rubber Sheet Flooring 2 mm Electrostatic-Dissipative

A solid rubber sheet combining material resilience with a controlled static-dissipation pathway.

2 mm dissipative vulcanized rubber
10^6–9 x 10^7 ohm ground-path selection
Personnel and flooring considered as one system

About This Product

The ED20 configuration is a 2 mm vulcanized rubber sheet selected for an installed resistance-to-ground range of 10^6 to 9 x 10^7 ohms. Its electrical formulation distinguishes it from ordinary rubber that merely generates a low walking charge. Performance is considered with the adhesive, grounding network and ESD footwear, particularly where people move between benches holding sensitive assemblies.

主要な特徴

Dissipation within the material

The electrical function belongs to the rubber formulation rather than a temporary applied floor polish. Maintenance should preserve direct contact with the working surface.

Resilient technical surface

The solid rubber body offers an alternative to PVC where the floor material itself is part of the specification for instrument rooms or electronics work areas.

Operator-aware selection

Low body-voltage generation depends on the tested footwear and floor combination. Treat the personnel pathway separately from a simple point-to-ground resistance reading.

技術的なパラメータ

Material	Dissipative vulcanized rubber
Nominal Thickness	2 mm
Construction	Homogeneous solid sheet
Resistance to Ground Selection	10^6–9 x 10^7 Ω
Electrical Function	Electrostatic dissipation
Attachment	Compatible ESD adhesive system
Earthing	Conductive strips and grounded connections
Personnel Interface	Compatible ESD footwear
Surface Maintenance	ESD-compatible rubber-floor cleaning
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

Applications

Suitable for electronics cleanrooms and instrument laboratories selecting resilient ESD flooring. Footwear, humidity and maintenance condition affect the personnel system and should be included in the acceptance method. Avoid extending a manufacturer's low body-voltage result to every shoe or operating environment; select and verify the actual combination used in the room.

Solutions for Your Application

Ordinary antistatic rubber is mistaken for a dissipative grade.

Specify the resistance-to-ground band and the electrical test method so the selected rubber has the required charge-control function.

Operators remain highly charged despite a grounded floor.

Check footwear compatibility and walking-voltage behaviour, along with floor cleanliness and earth connections, rather than measuring the floor alone.

利用可能なオプション

Choose the rubber colour, grounding layout and suitable adhesive. Include the intended ESD shoe types and cleaning routine when defining acceptance, and retain compatible rubber material for repairs around future service penetrations.

Planning a Cleanroom Rubber Sheet Flooring 2 mm Electrostatic-Dissipative specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する