Complete white digital differential pressure gauge with black display and green pressure reading

クリーンルーム管理 · 環境モニタリングシステム

デジタル差動圧力計

A digital wall gauge that presents low differential pressure in clear engineering units and adds programmable alarm, relay and communication functions.

High-Visibility Numeric Display
Programmable Alarm Limits
Multiple Pressure Units
Relay and Analog Outputs

見積もりリクエスト製品案内

商品紹介

The digital differential pressure gauge integrates a low-range sensor, bright numeric display and local alarm logic in one wall-mounted device. Users can select pressure units and view signed room-to-reference differential without converting an analog scale. Programmable high and low limits drive color change, buzzer or relays, while analog and digital outputs share the measured value with monitoring systems. A flush or surface mounting arrangement allows the display to remain readable at entrances and service corridors.

主要な特徴

Large signed digits remain readable from normal corridor viewing distance.

Selectable pressure units support Pa and other commonly used engineering scales.

Independent high and low thresholds drive local color and remote relay alarms.

Analog or network retransmission avoids installing a second room pressure sensor.

アプリケーションのソリューション

Room users need an unambiguous pressure value and alarm state without interpreting a small pointer scale.

A small analog scale is difficult to read from the corridor.Large backlit digits present the signed pressure value at a glance.

Staff misinterpret different pressure units used across rooms.A selectable and clearly displayed unit keeps each reading explicit.

The gauge shows pressure but cannot trigger a remote alarm.Programmable relays and analog output send the same condition to the monitoring system.

A brief door opening leaves the display in alarm long after closure.Adjustable delay and hysteresis distinguish transient doorway disturbances from sustained loss.

典型的な用途

Cleanroom entrance pressure displayAirlock status indicationIsolation room monitoringFilter differential indication

技術的なパラメータ

Typical materials and dimensions for a digital cleanroom differential pressure gauge are listed below.

コア材料	Silicon MEMS sensor with white polycarbonate bezel, tempered display lens and FR-4 electronics
パネルの厚さ	45-90 mm gauge depth
有効幅	120-200 mm front bezel width
最大長さ	Up to 240 mm bezel height
鋼鉄の厚さを直面する	0-1.0 mm; optional stainless rear mounting plate
コア密度	1180-1220 kg/m³ for polycarbonate bezel components
熱伝導率	ポリカーボネート製ハウジング材用0.19-0.22 W/(m·K)
表面仕上げ	Smooth white bezel with black glass display window and green-red status backlight
ジョイントタイプ	Flush or surface wall mount with rear pressure ports and removable power-signal terminal
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Surface or flush mountingGreen-red status backlightRelay and analog outputsBACnetまたはModbus通信

デジタル差圧ゲージ仕様を計画していますか?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する