Anglais
Le portugais
espagnol
Le malais
Indonésien
Allemand
Le turc
Le vietnamien
FrançaisCurrent
russe
Arabe
Thaïlandais
Japonais
Coréen
Systèmes de contrôle des salles blanches et de surveillance environnementale
Pressomètre différentiel numérique
A digital wall gauge that presents low differential pressure in clear engineering units and adds programmable alarm, relay and communication functions.
- High-Visibility Numeric Display
- Programmable Alarm Limits
- Multiple Pressure Units
- Relay and Analog Outputs
Introduction de produit
The digital differential pressure gauge integrates a low-range sensor, bright numeric display and local alarm logic in one wall-mounted device. Users can select pressure units and view signed room-to-reference differential without converting an analog scale. Programmable high and low limits drive color change, buzzer or relays, while analog and digital outputs share the measured value with monitoring systems. A flush or surface mounting arrangement allows the display to remain readable at entrances and service corridors.
Key Features
Selectable pressure units support Pa and other commonly used engineering scales.
Independent high and low thresholds drive local color and remote relay alarms.
Analog or network retransmission avoids installing a second room pressure sensor.
Des solutions pour votre application
Room users need an unambiguous pressure value and alarm state without interpreting a small pointer scale.
A small analog scale is difficult to read from the corridor.Large backlit digits present the signed pressure value at a glance.
Staff misinterpret different pressure units used across rooms.A selectable and clearly displayed unit keeps each reading explicit.
The gauge shows pressure but cannot trigger a remote alarm.Programmable relays and analog output send the same condition to the monitoring system.
A brief door opening leaves the display in alarm long after closure.Adjustable delay and hysteresis distinguish transient doorway disturbances from sustained loss.
Les applications typiques
Cleanroom entrance pressure displayAirlock status indicationIsolation room monitoringFilter differential indication
Paramètres techniques
Typical materials and dimensions for a digital cleanroom differential pressure gauge are listed below.
| Matériaux de base | Silicon MEMS sensor with white polycarbonate bezel, tempered display lens and FR-4 electronics |
|---|---|
| Panneau épaisseur | 45-90 mm gauge depth |
| Largeur effective | 120-200 mm front bezel width |
| Longueur maximale | Up to 240 mm bezel height |
| Acier face épaisseur | 0-1.0 mm; optional stainless rear mounting plate |
| Densité Core | 1180-1220 kg/m³ for polycarbonate bezel components |
| Conductivité thermique | 0.19-0.22 W/(m·K) for polycarbonate housing material |
| surface finie | Smooth white bezel with black glass display window and green-red status backlight |
| Type joint | Flush or surface wall mount with rear pressure ports and removable power-signal terminal |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Surface or flush mountingGreen-red status backlightRelay and analog outputsBACnet or Modbus communication
Planification d'une spécification de manomètre différentiel numérique?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
