Inglés
El portugués
EspañolCurrent
El malayo
Idioma indonesio
Alemán
El turco
El vietnamita
Francés
El ruso
El árabe
Tailandés
El japonés
Coreano
Control de salas limpias y sistemas de monitoreo ambiental
Pressómetro diferencial digital
A digital wall gauge that presents low differential pressure in clear engineering units and adds programmable alarm, relay and communication functions.
- High-Visibility Numeric Display
- Programmable Alarm Limits
- Multiple Pressure Units
- Relay and Analog Outputs
Introducción del producto
The digital differential pressure gauge integrates a low-range sensor, bright numeric display and local alarm logic in one wall-mounted device. Users can select pressure units and view signed room-to-reference differential without converting an analog scale. Programmable high and low limits drive color change, buzzer or relays, while analog and digital outputs share the measured value with monitoring systems. A flush or surface mounting arrangement allows the display to remain readable at entrances and service corridors.
Características clave
Selectable pressure units support Pa and other commonly used engineering scales.
Independent high and low thresholds drive local color and remote relay alarms.
Analog or network retransmission avoids installing a second room pressure sensor.
Soluciones para su aplicación
Room users need an unambiguous pressure value and alarm state without interpreting a small pointer scale.
A small analog scale is difficult to read from the corridor.Large backlit digits present the signed pressure value at a glance.
Staff misinterpret different pressure units used across rooms.A selectable and clearly displayed unit keeps each reading explicit.
The gauge shows pressure but cannot trigger a remote alarm.Programmable relays and analog output send the same condition to the monitoring system.
A brief door opening leaves the display in alarm long after closure.Adjustable delay and hysteresis distinguish transient doorway disturbances from sustained loss.
Aplicaciones típicas
Cleanroom entrance pressure displayAirlock status indicationIsolation room monitoringFilter differential indication
Parámetros técnicos
Typical materials and dimensions for a digital cleanroom differential pressure gauge are listed below.
| Materiales Core | Silicon MEMS sensor with white polycarbonate bezel, tempered display lens and FR-4 electronics |
|---|---|
| Panel de espesor | 45-90 mm gauge depth |
| Ancho efectivo | 120-200 mm front bezel width |
| Longitud máxima | Up to 240 mm bezel height |
| Acero frente a espesor | 0-1.0 mm; optional stainless rear mounting plate |
| Densidad Core | 1180-1220 kg/m³ for polycarbonate bezel components |
| Conductividad térmica | 0.19-0.22 W/(m·K) para el material de la carcasa de policarbonato |
| Superficie acabada | Smooth white bezel with black glass display window and green-red status backlight |
| Tipo conjunto | Flush or surface wall mount with rear pressure ports and removable power-signal terminal |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Surface or flush mountingGreen-red status backlightRelay and analog outputsBACnet or Modbus communication
¿Planificación de una especificación de manómetro diferencial digital?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
