Automatic boot washer complete three-quarter view with three blue brushes and grab rail

業界特有のクリーンルーム機器

A 自動ブーツ洗濯機

A compact stainless three-brush washer that automatically scrubs boot soles and shafts with metered water and cleaning chemical.

Three-Brush Cleaning
Automatic Water and Dosing
Stable Grab Rail
Wash-Down Stainless Basin

見積もりリクエスト製品案内

商品紹介

The automatic boot washer positions one powered horizontal brush beneath the sole and two vertical brushes around the boot shaft. Activation starts coordinated brushing with water and detergent inside a drained stainless basin. The overhead rail supports the operator, while accessible controls and a separate dosing enclosure simplify use and service in wet food-production entrances.

主要な特徴

One sole brush and two opposed shaft brushes clean three footwear surfaces together.

Automatic spray and chemical dosing standardize each cleaning cycle.

A rigid overhead handrail improves balance while the brushes rotate.

The open stainless basin exposes the brush set for rinsing and inspection.

アプリケーションのソリューション

Manual boot cleaning is inconsistent, time-consuming and often misses shaft surfaces where food soil remains attached.

Hand brushing produces variable contact time and coverage.Three powered brushes apply repeatable mechanical action to soles and both boot shafts.

Workers may use too little or too much cleaning chemical.The integrated dosing enclosure meters solution during the automatic cycle.

Rotating brushes can affect operator balance.A full-width stainless grab arch provides stable support throughout cleaning.

Enclosed mechanisms are difficult to rinse after production.An open basin and exposed removable brush assemblies support wash-down and inspection.

典型的な用途

Meat and poultry plantsDairy processing entrancesSeafood and ready-meal productionWet pharmaceutical utility areas

技術的なパラメータ

Typical configurable construction values for a compact automatic boot washer are listed below.

コア材料	304 stainless-steel frame and basin with blue food-grade polymer brushes
パネルの厚さ	40-80 mm basin and drive-enclosure sections
有効幅	450-700 mm clear boot-cleaning opening
最大長さ	Up to 1100 mm overall machine length
鋼鉄の厚さを直面する	1.5-2.5 mm stainless basin and enclosure facing
コア密度	7950-ステンレス钢の建设のための8050 kg/mの ³
熱伝導率	オーステナイト系ステンレス钢のための14-16 W/(m・K)
表面仕上げ	Brushed hygienic stainless with blue replaceable polymer brushes
ジョイントタイプ	Welded drained basin with removable brush shafts and sealed control/dosing enclosures
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Photocell or push-button activationAlternative brush stiffness and heightDetergent or disinfectant dosing packageLeft- or right-side service enclosure

Planning a Automatic Boot Washer specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する