İngilizce
Portekizce
İspanyolca
Malay dilinde
Endonezya dilinde
Almanca
TürkçeCurrent
Vietnamca
Fransızca
Rusça
Arapça
Taylandca
Japonca
Korece
Endüstriye Özel Temiz Oda Ekipmanları
Otomatik Boot Washer
A compact stainless three-brush washer that automatically scrubs boot soles and shafts with metered water and cleaning chemical.
- Three-Brush Cleaning
- Automatic Water and Dosing
- Stable Grab Rail
- Wash-Down Stainless Basin
Ürün tanıtımı
The automatic boot washer positions one powered horizontal brush beneath the sole and two vertical brushes around the boot shaft. Activation starts coordinated brushing with water and detergent inside a drained stainless basin. The overhead rail supports the operator, while accessible controls and a separate dosing enclosure simplify use and service in wet food-production entrances.
Ana Özellikler
Automatic spray and chemical dosing standardize each cleaning cycle.
A rigid overhead handrail improves balance while the brushes rotate.
The open stainless basin exposes the brush set for rinsing and inspection.
Uygulamanız için çözümler
Manual boot cleaning is inconsistent, time-consuming and often misses shaft surfaces where food soil remains attached.
Hand brushing produces variable contact time and coverage.Three powered brushes apply repeatable mechanical action to soles and both boot shafts.
Workers may use too little or too much cleaning chemical.The integrated dosing enclosure meters solution during the automatic cycle.
Rotating brushes can affect operator balance.A full-width stainless grab arch provides stable support throughout cleaning.
Enclosed mechanisms are difficult to rinse after production.An open basin and exposed removable brush assemblies support wash-down and inspection.
Tipik uygulamalar
Meat and poultry plantsDairy processing entrancesSeafood and ready-meal productionWet pharmaceutical utility areas
Teknik parametreler
Typical configurable construction values for a compact automatic boot washer are listed below.
| Temel malzemeler | 304 stainless-steel frame and basin with blue food-grade polymer brushes |
|---|---|
| Panel kalınlığı | 40-80 mm basin and drive-enclosure sections |
| Effective Width (Etkili Genişlik) | 450-700 mm clear boot-cleaning opening |
| Maksimum uzunluk | Up to 1100 mm overall machine length |
| Çelik yüz yüze kalınlığı | 1.5-2.5 mm stainless basin and enclosure facing |
| Core Density (Çekirdek Yoğunluğu) | Paslanmaz çelik konstrüksiyon için 7950-8050 kg/m³ |
| Termal İletkenlik | Östenitik paslanmaz çelik için 14-16 w/(m · k) |
| Yüzey bitirme | Brushed hygienic stainless with blue replaceable polymer brushes |
| Ortak tip | Welded drained basin with removable brush shafts and sealed control/dosing enclosures |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Photocell or push-button activationAlternative brush stiffness and heightDetergent or disinfectant dosing packageLeft- or right-side service enclosure
Planning a Automatic Boot Washer specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
