STjh standard floor-standing 304 stainless pass box with full-height glazed doors and an open cart threshold

STJH-FLOOR-STANDING-PASS-BOX-STANDARD

Floor-Standing Stainless Steel Pass Box Standard

A passive open-floor transfer cabinet that lets wheeled carts cross the cleanroom boundary without climbing over an integrated sill.

No integrated transfer floor
Double-wall type 304 stainless body
Direct wheeled-cart passage

Permintaan untuk kutipan Browse Produk

Perkenalan produk

This standard floor-standing pass box uses a rigid double-wall type 304 stainless body around an open transfer path with no integrated floor. Carts and large parts can roll directly through, while compression-latched doors, closed-cell gaskets, door sweeps and an optional mechanical interlock help preserve the room boundary. It is the simplest member of the three-model floor-standing group because it adds neither active HEPA recirculation nor a fully welded aseptic body.

Fitur utama:

Threshold-free cart route

The open base removes a cabinet floor that would otherwise require a ramp or cart lift.

Impact-tolerant double wall

The formed, stitch-welded shell conceals service hardware and withstands routine contact from cart traffic.

Pressure-conscious door closure

Compression latches, gaskets and floor sweeps reduce leakage around the large door perimeter.

Parameter teknis

Installation	Floor-standing at a cleanroom partition
Transfer Floor	Open; no integrated cabinet floor
Body Construction	Double-wall formed and stitch-welded stainless steel
Primary Material	Type 304 stainless steel with #4 finish
Door Hinges	Continuous flush-mounted stainless steel
Viewing Windows	Clear tempered safety glass
Door Latches	Type 316 stainless lever compression latches
Door Seals	Closed-cell PVC foam gaskets with vinyl door sweeps
Interlock	Mechanical interlock available
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Applications

For carts, large components and production equipment entering industrial, electronics or general manufacturing cleanrooms where active chamber filtration is unnecessary. Buyers should measure the entire cart, including handles and caster swing, and coordinate the finished floor on both sides for a truly unobstructed route.

Solutions for Your Application

A conventional cabinet sill catches small casters and destabilizes tall cart loads.The no-floor design lets the facility floor continue through the chamber without an equipment threshold.

Large doors can leak or be opened together during rushed transfers.Use compression-latched gasketed doors and add the mechanical interlock when the pressure cascade requires controlled sequencing.

Pilihan yang tersedia

Specify clear opening, cabinet depth, wall mounting frame, door windows and mechanical interlock. Confirm floor flatness, door swing, cart turning radius and whether passive transfer is sufficient for the product risk.

Planning a Floor-Standing Stainless Steel Pass Box Standard specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami