Nhà cung cấp một cửa của bạn cho thiết bị phòng sạch và thiết bị vô trùng cơ sở thiết yếuHỗ trợ dự án quốc tế
Open mobile navigationClose mobile navigation
Trang chủ / Sản phẩm / Thiết bị phòng sạch / Floor-Standing Stainless Steel Pass Box Standard
STJH-FLOOR-STANDING-PASS-BOX-STANDARD

Floor-Standing Stainless Steel Pass Box Standard

A passive open-floor transfer cabinet that lets wheeled carts cross the cleanroom boundary without climbing over an integrated sill.
  • No integrated transfer floor
  • Double-wall type 304 stainless body
  • Direct wheeled-cart passage
Yêu cầu báo giá Duyệt các sản phẩm

Giới thiệu Sản phẩm

This standard floor-standing pass box uses a rigid double-wall type 304 stainless body around an open transfer path with no integrated floor. Carts and large parts can roll directly through, while compression-latched doors, closed-cell gaskets, door sweeps and an optional mechanical interlock help preserve the room boundary. It is the simplest member of the three-model floor-standing group because it adds neither active HEPA recirculation nor a fully welded aseptic body.

Các tính năng chính

Threshold-free cart route

The open base removes a cabinet floor that would otherwise require a ramp or cart lift.

Impact-tolerant double wall

The formed, stitch-welded shell conceals service hardware and withstands routine contact from cart traffic.

Pressure-conscious door closure

Compression latches, gaskets and floor sweeps reduce leakage around the large door perimeter.

Thông số kỹ thuật

InstallationFloor-standing at a cleanroom partition
Transfer FloorOpen; no integrated cabinet floor
Body ConstructionDouble-wall formed and stitch-welded stainless steel
Primary MaterialType 304 stainless steel with #4 finish
Door HingesContinuous flush-mounted stainless steel
Viewing WindowsClear tempered safety glass
Door LatchesType 316 stainless lever compression latches
Door SealsClosed-cell PVC foam gaskets with vinyl door sweeps
InterlockMechanical interlock available
Tùy chỉnhCó sẵn dựa trên ứng dụng dự định và môi trường hoạt động.

Applications

For carts, large components and production equipment entering industrial, electronics or general manufacturing cleanrooms where active chamber filtration is unnecessary. Buyers should measure the entire cart, including handles and caster swing, and coordinate the finished floor on both sides for a truly unobstructed route.

Solutions for Your Application

A conventional cabinet sill catches small casters and destabilizes tall cart loads.The no-floor design lets the facility floor continue through the chamber without an equipment threshold.
Large doors can leak or be opened together during rushed transfers.Use compression-latched gasketed doors and add the mechanical interlock when the pressure cascade requires controlled sequencing.

Các tùy chọn có sẵn

Specify clear opening, cabinet depth, wall mounting frame, door windows and mechanical interlock. Confirm floor flatness, door swing, cart turning radius and whether passive transfer is sufficient for the product risk.

Planning a Floor-Standing Stainless Steel Pass Box Standard specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi
Email cho chúng tôi WhatsApp WeChat

Trang chủ

Sản phẩm

Tin tức

Về chúng tôi

Liên hệ