STJH HB10 conductive epoxy flooring sample with a smooth face and uniform resin cut edge on white

STJH-CONDUCTIVE-EPOXY-FLOORING-HB10

Conductive Epoxy Flooring High-Build Floor Coating

A smooth conductive epoxy coating for working areas requiring a defined low-resistance floor construction.

0.8-1.0 mm high-build construction
Conductivity through the resin body
Smooth nonporous exposed face

About This Product

HB10 is a high-build conductive epoxy floor with a nominal 0.8-1.0 mm wearing construction. Conductive material is incorporated through the resin thickness, so the floor is not dependent on an applied polish to create its charge path. The exposed surface remains smooth and nonporous. This general conductive model is separate from low-emission specialist cleanroom resin and chemical-resistant aggregate-broadcast systems.

Fitur utama:

Integral conductive network

Conductive constituents are distributed within the coating, supporting the intended electrical path as the wearing surface is used.

Practical routine cleaning

The smooth face helps cleaning tools contact the floor uniformly, important where maintenance residue could alter electrical contact.

Shallow installation profile

The high-build coating can be detailed around existing equipment bases without introducing the depth of a mortar screed.

Parameter teknis

Chemistry	Two-component conductive epoxy
Nominal Thickness	0.8-1.0 mm
Reference Resistance Range	2.5 × 10⁴ to 1.0 × 10⁶ Ω
Conductive Structure	Through-thickness network
Permukaan selesai	Smooth nonporous
Grounding	Compatible conductive system connections
Base	Sound prepared and primed substrate
Humidity Dependence	Conductive formulation not based on humidity activation
Traffic Area	Interior production and data-processing floors
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Applications

Suitable for electronics manufacturing, data-processing rooms and pharmaceutical clean support areas requiring a conductive floor range. The completed installation should retain an appropriate maintenance regime and compatible contact interfaces. An insulating overcoat or unsuitable floor dressing can change the exposed electrical behaviour.

Solutions for Your Application

Static control is currently provided by a frequently renewed floor treatment.

Use the conductive resin construction as the permanent wearing system instead of relying on polish.

Floor maintenance may introduce an insulating residue.

Select suitable cleaners and avoid coatings that interrupt contact with the conductive epoxy.

Pilihan yang tersedia

Specify colour, grounding connections and the required ESD footwear arrangement. Keep chemical exposure and concentrated wheel loads within the selected floor design rather than inferring suitability from resistance alone.

Planning a Conductive Epoxy Flooring High-Build Floor Coating specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami