English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
Integral conductive network
Conductive constituents are distributed within the coating, supporting the intended electrical path as the wearing surface is used.
STJH-CONDUCTIVE-EPOXY-FLOORING-HB10
Conductive Epoxy Flooring High-Build Floor Coating
A smooth conductive epoxy coating for working areas requiring a defined low-resistance floor construction.
- 0.8-1.0 mm high-build construction
- Conductivity through the resin body
- Smooth nonporous exposed face
About This Product
HB10 is a high-build conductive epoxy floor with a nominal 0.8-1.0 mm wearing construction. Conductive material is incorporated through the resin thickness, so the floor is not dependent on an applied polish to create its charge path. The exposed surface remains smooth and nonporous. This general conductive model is separate from low-emission specialist cleanroom resin and chemical-resistant aggregate-broadcast systems.
الخصائص الرئيسية
Practical routine cleaning
The smooth face helps cleaning tools contact the floor uniformly, important where maintenance residue could alter electrical contact.
Shallow installation profile
The high-build coating can be detailed around existing equipment bases without introducing the depth of a mortar screed.
المعلمات الفنية
| Chemistry | Two-component conductive epoxy |
|---|---|
| Nominal Thickness | 0.8-1.0 mm |
| Reference Resistance Range | 2.5 × 10⁴ to 1.0 × 10⁶ Ω |
| Conductive Structure | Through-thickness network |
| إنهاء السطح | Smooth nonporous |
| Grounding | Compatible conductive system connections |
| Base | Sound prepared and primed substrate |
| Humidity Dependence | Conductive formulation not based on humidity activation |
| Traffic Area | Interior production and data-processing floors |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
Applications
Suitable for electronics manufacturing, data-processing rooms and pharmaceutical clean support areas requiring a conductive floor range. The completed installation should retain an appropriate maintenance regime and compatible contact interfaces. An insulating overcoat or unsuitable floor dressing can change the exposed electrical behaviour.
Solutions for Your Application
Static control is currently provided by a frequently renewed floor treatment.
Use the conductive resin construction as the permanent wearing system instead of relying on polish.
Floor maintenance may introduce an insulating residue.
Select suitable cleaners and avoid coatings that interrupt contact with the conductive epoxy.
الخيارات المتاحة
Specify colour, grounding connections and the required ESD footwear arrangement. Keep chemical exposure and concentrated wheel loads within the selected floor design rather than inferring suitability from resistance alone.
Planning a Conductive Epoxy Flooring High-Build Floor Coating specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
