Three-quarter view of a zinc-plated sleeve expansion anchor

Aksesoris Instalasi Cleanroom

Pengembangan Anchor

A zinc-plated sleeve anchor that expands mechanically inside a drilled concrete hole to secure cleanroom support frames and brackets.

Positive Mechanical Expansion
Slotted Steel Sleeve
Integrated Nut and Washer
Immediate Load Transfer

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The expansion anchor combines a threaded steel shank, slotted cylindrical sleeve, tapered end cone, washer and hex nut. Tightening the nut draws the cone into the sleeve, forcing its segments against the drilled-hole wall to create a mechanical hold. The fixing is suited to cleanroom frames, ceiling supports and service brackets where a direct set-and-tighten installation is preferred in sound concrete.

Fitur utama:

A tapered cone expands the slotted sleeve against the bore wall during tightening.

The supplied washer distributes seating pressure across the attached bracket.

Zinc-plated steel provides a practical finish for dry concealed interior support zones.

Mechanical setting provides an immediately secured connection without resin-curing time.

Solusi untuk aplikasi Anda

Support brackets require a predictable mechanical fixing that can be installed and tightened immediately in sound concrete.

Loose drilled holes allow the anchor to spin during tightening.Matched drill diameter and a cleaned hole let the sleeve engage the substrate uniformly.

Excessive torque can damage the substrate or deform a light bracket.The specified anchor size and setting torque control sleeve expansion and washer pressure.

Short embedment reduces engagement of the expansion zone.Hole depth and anchor length are selected so the full slotted sleeve seats in sound base material.

Unprotected steel can corrode in humid service spaces.Zinc-plated, hot-dip galvanized or stainless material is selected for the exposure.

Aplikasi yang Tipis

Cleanroom wall-frame anchorsCeiling support bracketsService channel base platesDoor-frame fixing platesConcrete-mounted utility supports

Parameter teknis

Typical construction and compatibility ranges for a zinc-plated sleeve expansion anchor are listed below.

Bahan inti	Zinc-plated carbon-steel bolt, slotted expansion sleeve, cone, washer and nut
Ketebalan Panel (Panel Thickness)	5-50 mm compatible attached-bracket or fixture thickness
Efektif lebar	8-24 mm nominal anchor and drilled-hole diameter
Panjang maksimum	Up to 300 mm overall anchor length
Baja menghadap ketebalan	0.80-2.50 mm formed expansion-sleeve wall
Kepadatan inti (core density)	Approximately 7850 kg/m³ for carbon-steel components
Konduktivitas Termal (Thermal Conductivity)	Approximately 45-60 W/(m·K) for carbon steel
Permukaan selesai	Silver zinc-plated steel or optional passivated stainless steel
Jenis Bersama	Torque-set mechanical anchorage with cone-expanded slotted sleeve
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Zinc-plated or stainless steelMultiple anchor diametersStandard or extended fixture thicknessHex nut or bolt-head setting

Planning a Expansion Anchor specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami