English
البرتغالية
الإسبانية
اللغة الملاوية
الإندونيسية
الألمانية
اللغة التركية
اللغة الفيتنامية
الفرنسية
الروسية
العربيةالحالي
التايلاندية
اليابانية
الكورية
اكسسوارات تركيب الغرف النظيفة
مرساة التوسع
A zinc-plated sleeve anchor that expands mechanically inside a drilled concrete hole to secure cleanroom support frames and brackets.
- Positive Mechanical Expansion
- Slotted Steel Sleeve
- Integrated Nut and Washer
- Immediate Load Transfer
مقدمة المنتج
The expansion anchor combines a threaded steel shank, slotted cylindrical sleeve, tapered end cone, washer and hex nut. Tightening the nut draws the cone into the sleeve, forcing its segments against the drilled-hole wall to create a mechanical hold. The fixing is suited to cleanroom frames, ceiling supports and service brackets where a direct set-and-tighten installation is preferred in sound concrete.
الخصائص الرئيسية
The supplied washer distributes seating pressure across the attached bracket.
Zinc-plated steel provides a practical finish for dry concealed interior support zones.
Mechanical setting provides an immediately secured connection without resin-curing time.
حلول للتطبيق الخاص بك
Support brackets require a predictable mechanical fixing that can be installed and tightened immediately in sound concrete.
Loose drilled holes allow the anchor to spin during tightening.Matched drill diameter and a cleaned hole let the sleeve engage the substrate uniformly.
Excessive torque can damage the substrate or deform a light bracket.The specified anchor size and setting torque control sleeve expansion and washer pressure.
Short embedment reduces engagement of the expansion zone.Hole depth and anchor length are selected so the full slotted sleeve seats in sound base material.
Unprotected steel can corrode in humid service spaces.Zinc-plated, hot-dip galvanized or stainless material is selected for the exposure.
تطبيقات نموذجية
Cleanroom wall-frame anchorsCeiling support bracketsService channel base platesDoor-frame fixing platesConcrete-mounted utility supports
المعلمات الفنية
Typical construction and compatibility ranges for a zinc-plated sleeve expansion anchor are listed below.
| المواد الأساسية | Zinc-plated carbon-steel bolt, slotted expansion sleeve, cone, washer and nut |
|---|---|
| سمك اللوحة | 5-50 mm compatible attached-bracket or fixture thickness |
| العرض الفعال | 8-24 mm nominal anchor and drilled-hole diameter |
| الحد الأقصى الطول | Up to 300 mm overall anchor length |
| الصلب يواجه سمك | 0.80-2.50 mm formed expansion-sleeve wall |
| الكثافة الأساسية | Approximately 7850 kg/m³ for carbon-steel components |
| الموصلية الحرارية | Approximately 45-60 W/(m·K) for carbon steel |
| إنهاء السطح | Silver zinc-plated steel or optional passivated stainless steel |
| نوع المشترك | Torque-set mechanical anchorage with cone-expanded slotted sleeve |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Zinc-plated or stainless steelMultiple anchor diametersStandard or extended fixture thicknessHex nut or bolt-head setting
Planning a Expansion Anchor specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
