Three-quarter view of a zinc-plated sleeve expansion anchor

클린룸 설치 액세서리

확장 앵커

A zinc-plated sleeve anchor that expands mechanically inside a drilled concrete hole to secure cleanroom support frames and brackets.

Positive Mechanical Expansion
Slotted Steel Sleeve
Integrated Nut and Washer
Immediate Load Transfer

견적 요청 제품 찾아보기

상품 소개

The expansion anchor combines a threaded steel shank, slotted cylindrical sleeve, tapered end cone, washer and hex nut. Tightening the nut draws the cone into the sleeve, forcing its segments against the drilled-hole wall to create a mechanical hold. The fixing is suited to cleanroom frames, ceiling supports and service brackets where a direct set-and-tighten installation is preferred in sound concrete.

주요 기능

A tapered cone expands the slotted sleeve against the bore wall during tightening.

The supplied washer distributes seating pressure across the attached bracket.

Zinc-plated steel provides a practical finish for dry concealed interior support zones.

Mechanical setting provides an immediately secured connection without resin-curing time.

응용 프로그램 솔루션

Support brackets require a predictable mechanical fixing that can be installed and tightened immediately in sound concrete.

Loose drilled holes allow the anchor to spin during tightening.Matched drill diameter and a cleaned hole let the sleeve engage the substrate uniformly.

Excessive torque can damage the substrate or deform a light bracket.The specified anchor size and setting torque control sleeve expansion and washer pressure.

Short embedment reduces engagement of the expansion zone.Hole depth and anchor length are selected so the full slotted sleeve seats in sound base material.

Unprotected steel can corrode in humid service spaces.Zinc-plated, hot-dip galvanized or stainless material is selected for the exposure.

일반적인 응용 프로그램

Cleanroom wall-frame anchorsCeiling support bracketsService channel base platesDoor-frame fixing platesConcrete-mounted utility supports

기술 매개변수

Typical construction and compatibility ranges for a zinc-plated sleeve expansion anchor are listed below.

핵심 재료	Zinc-plated carbon-steel bolt, slotted expansion sleeve, cone, washer and nut
패널 두께	5-50 mm compatible attached-bracket or fixture thickness
유효 폭	8-24 mm nominal anchor and drilled-hole diameter
최대 길이	Up to 300 mm overall anchor length
강철 면면 두께	0.80-2.50 mm formed expansion-sleeve wall
코어 밀도	탄소강 구성 요소의 경우 약 7850 kg/m³
열전도도 (Thermal Conductivity)	탄소강의 약 45-60 W/(m·K)
표면 마무리	Silver zinc-plated steel or optional passivated stainless steel
접합 유형	Torque-set mechanical anchorage with cone-expanded slotted sleeve
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Zinc-plated or stainless steelMultiple anchor diametersStandard or extended fixture thicknessHex nut or bolt-head setting

Planning a Expansion Anchor specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.