Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Colour coverage planning
Light shades may need additional coating passes for opacity, so the selected colour and coat sequence should be assessed together on the prepared base.
STJH-THIN-FILM-EPOXY-FLOOR-COATING-WB040-060-TEXTURED
Thin-Film Epoxy Floor Coating 0.4-0.6 mm Textured Waterborne
A textured waterborne epoxy finish that forms its profile with an additive instead of a separate aggregate broadcast.
- 0.4-0.6 mm textured construction
- 2% thixotropic extender in topcoat
- No separate broadcast aggregate bed
About This Product
WB040-060-TEXTURED uses a diluted primer followed by one or two waterborne epoxy coats containing a thixotropic extender. The additive helps the wet coating retain its textured form, producing a semi-gloss face within a 0.4-0.6 mm build. This structure is distinct from smooth waterborne seals and from floors where grit is scattered into a thick base layer.
Key Features
Permeable film structure
Water-vapour transmission is retained by the waterborne epoxy system, although the base still needs suitable moisture conditions.
Controlled roller coverage
Consistent material loading and rolling direction help avoid visibly different texture between adjacent application strips.
Paramètres techniques
| Binder | Water-dispersed epoxy |
|---|---|
| Nominal Thickness | 0.4-0.6 mm |
| Primer | Waterborne epoxy with 5% water by weight |
| Topcoat Additive | 2% thixotropic extender |
| Topcoat Count | One or two |
| Surface | Textured semi-gloss |
| Topcoat Consumption | Approximately 0.2-0.3 kg/m² per layer |
| Vapour Behaviour | Water-vapour permeable |
| Application Temperature | 10-30 °C |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Applications
Suitable for production support rooms and internal service routes needing a modestly textured floor without a heavy aggregate screed. Match the finished profile with the cleaning method, especially where powders or sticky residues may collect in texture valleys.
Solutions for Your Application
Condensation marks the coating before it has hardened.
Keep the uncured surface above the dew point and protect the fresh floor from damp and water.
A confined room retains moisture during waterborne curing.
Provide fresh-air circulation to remove the released moisture and allow the coating to cure before restarting normal traffic.
Options disponibles
Specify colour and the intended number of textured coats within the supported build. Provide a compatible perimeter finish and suitable ventilation for the waterborne application.
Planning a Thin-Film Epoxy Floor Coating 0.4-0.6 mm Textured Waterborne specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
