STJH WB040-060-TEXTURED cured epoxy sample showing a resin-formed textured face and thin cut edge on white

STJH-THIN-FILM-EPOXY-FLOOR-COATING-WB040-060-TEXTURED

Thin-Film Epoxy Floor Coating 0.4-0.6 mm Textured Waterborne

A textured waterborne epoxy finish that forms its profile with an additive instead of a separate aggregate broadcast.

0.4-0.6 mm textured construction
2% thixotropic extender in topcoat
No separate broadcast aggregate bed

견적 요청 제품 찾아보기

About This Product

WB040-060-TEXTURED uses a diluted primer followed by one or two waterborne epoxy coats containing a thixotropic extender. The additive helps the wet coating retain its textured form, producing a semi-gloss face within a 0.4-0.6 mm build. This structure is distinct from smooth waterborne seals and from floors where grit is scattered into a thick base layer.

주요 기능

Colour coverage planning

Light shades may need additional coating passes for opacity, so the selected colour and coat sequence should be assessed together on the prepared base.

Permeable film structure

Water-vapour transmission is retained by the waterborne epoxy system, although the base still needs suitable moisture conditions.

Controlled roller coverage

Consistent material loading and rolling direction help avoid visibly different texture between adjacent application strips.

기술 매개변수

Binder	Water-dispersed epoxy
Nominal Thickness	0.4-0.6 mm
Primer	Waterborne epoxy with 5% water by weight
Topcoat Additive	2% thixotropic extender
Topcoat Count	One or two
Surface	Textured semi-gloss
Topcoat Consumption	Approximately 0.2-0.3 kg/m² per layer
Vapour Behaviour	Water-vapour permeable
Application Temperature	10-30 °C
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

Suitable for production support rooms and internal service routes needing a modestly textured floor without a heavy aggregate screed. Match the finished profile with the cleaning method, especially where powders or sticky residues may collect in texture valleys.

Solutions for Your Application

Condensation marks the coating before it has hardened.

Keep the uncured surface above the dew point and protect the fresh floor from damp and water.

A confined room retains moisture during waterborne curing.

Provide fresh-air circulation to remove the released moisture and allow the coating to cure before restarting normal traffic.

사용 가능한 옵션

Specify colour and the intended number of textured coats within the supported build. Provide a compatible perimeter finish and suitable ventilation for the waterborne application.

Planning a Thin-Film Epoxy Floor Coating 0.4-0.6 mm Textured Waterborne specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.