STJH HB05 cured two-coat epoxy flooring sample with a thin glossy coating visible at its cut edge on white

STJH-SOLVENT-FREE-HIGH-BUILD-EPOXY-FLOORING-HB05

Solvent-Free High-Build Epoxy Flooring 0.5 mm

A compact high-build epoxy coating for sound internal floors that need a coloured, washable wearing surface.

Two epoxy wearing applications
Approximately 0.5 mm system build
Smooth solid-colour appearance

About This Product

HB05 uses two epoxy applications to create an approximately 0.5 mm finish above the prepared base. The first coat establishes coverage and the second completes the exposed gloss surface. It is a coating system rather than a levelling screed, so existing slab geometry remains important. This smooth version serves enclosed utility and production areas where a multi-millimetre mineral body is unnecessary.

Key Features

Low additional height

The shallow coating can be detailed around established door clearances without introducing the depth of a heavy mortar floor.

Accessible maintenance surface

The continuous gloss face allows routine soil removal with appropriate cleaning tools instead of trapping dirt between tile joints.

Flexible application tools

Squeegee and roller placement suits enclosed rooms as well as longer floor strips, with cross-rolling used to even out coverage.

Paramètres techniques

Resin Family	Solvent-free two-pack epoxy
System Thickness	Approximately 0.5 mm
Wearing-Coat Count	Two
Finish	Smooth high gloss
Primer Options	Compatible water-based or standard epoxy primer
Application Tools	Squeegee, brush and roller
Substrate	Sound prepared concrete
Texture	Unbroadcast smooth configuration
Service Location	Interior utility and industrial floors
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Applications

Suitable for clean utility rooms, designated pedestrian lanes and controlled manufacturing support spaces. Select a deeper screed where impact damage or uneven concrete demands a repair body; this coating is intended to protect a base that is already serviceable.

Solutions for Your Application

The floor needs colour zoning but has limited threshold clearance.

Use the thin high-build construction and position colour breaks at planned boundaries.

A second coat may reproduce holes left in the first application.

Inspect coverage between coats and close local voids before completing the exposed layer.

Options disponibles

Choose lane colours, compatible primer and cove interface to suit the substrate. Keep the smooth build for areas where cleaning is the priority; wet traction requirements call for a separately defined textured configuration.

Planning a Solvent-Free High-Build Epoxy Flooring 0.5 mm specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe