Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Reduced transition depth
A relatively shallow wearing course can make it easier to meet adjoining resilient or hard flooring during an interior refurbishment.
STJH-SEAMLESS-EPOXY-TERRAZZO-FLOORING-FINE-6MM
Seamless Epoxy Terrazzo Flooring 6 mm Fine-Aggregate
Fine mineral chips create a polished terrazzo surface with a restrained installation depth.
- Thin-set mineral terrazzo
- Fine marble or granite chips
- Pigmented two-component binder
About This Product
The fine-aggregate version uses a pigmented epoxy binder filled with selected marble or granite chips. Its nominal quarter-inch build, approximately 6 mm, suits transitions where a thicker terrazzo would require greater changes to thresholds. Trowelling compacts the mixture before grinding and sealing expose the fine mineral pattern. The system remains a cast resin floor, with no tile backing or factory-laid sheet joints.
Key Features
Closely spaced aggregate
Smaller chips produce a detailed visual field that works well in narrow corridors and other spaces viewed at close range.
Finish adjusted by sealing
The ground matrix accepts a compatible finish coat selected for the room's cleaning and appearance requirements.
Paramètres techniques
| Binder Type | Pigmented epoxy resin |
|---|---|
| Nominal Thickness | Approximately 6 mm (1/4 in nominal) |
| Aggregate | Fine marble or granite |
| Binder Mixing Ratio | 3:1 resin to hardener by volume |
| Aggregate Addition | Mineral chips and marble dust filler |
| Application Method | Trowelled and compacted |
| Finishing Sequence | Grind, fill pores and seal |
| Surface Character | Smooth polished mineral pattern |
| Typical Substrate | Prepared concrete |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Applications
Use in dry healthcare circulation, pharmaceutical research corridors and public support areas requiring a decorative hard floor. A thin wearing course follows major substrate variations, so local leveling should be completed before laying the terrazzo rather than consuming the finish material to correct deep depressions.
Solutions for Your Application
The refurbishment cannot accept a thick new floor at doorways.
Plan the nominal 6 mm wearing layer with its substrate preparation and sealer, checking transitions before work starts.
Small pinholes remain visible after polishing.
Include the pore-filling stage between grinding operations so that the final seal covers a properly closed surface.
Options disponibles
Select fine aggregate proportions, matrix shade and sealer sheen from finished samples. Specify divider placement and curved perimeter details as part of the overall floor design.
Planning a Seamless Epoxy Terrazzo Flooring 6 mm Fine-Aggregate specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
