STJH fine-chip epoxy terrazzo thin cured sample with polished face and visible cut edge on white

STJH-SEAMLESS-EPOXY-TERRAZZO-FLOORING-FINE-6MM

Seamless Epoxy Terrazzo Flooring 6 mm Fine-Aggregate

Fine mineral chips create a polished terrazzo surface with a restrained installation depth.

Thin-set mineral terrazzo
Fine marble or granite chips
Pigmented two-component binder

견적 요청 제품 찾아보기

About This Product

The fine-aggregate version uses a pigmented epoxy binder filled with selected marble or granite chips. Its nominal quarter-inch build, approximately 6 mm, suits transitions where a thicker terrazzo would require greater changes to thresholds. Trowelling compacts the mixture before grinding and sealing expose the fine mineral pattern. The system remains a cast resin floor, with no tile backing or factory-laid sheet joints.

주요 기능

Reduced transition depth

A relatively shallow wearing course can make it easier to meet adjoining resilient or hard flooring during an interior refurbishment.

Closely spaced aggregate

Smaller chips produce a detailed visual field that works well in narrow corridors and other spaces viewed at close range.

Finish adjusted by sealing

The ground matrix accepts a compatible finish coat selected for the room's cleaning and appearance requirements.

기술 매개변수

Binder Type	Pigmented epoxy resin
Nominal Thickness	Approximately 6 mm (1/4 in nominal)
Aggregate	Fine marble or granite
Binder Mixing Ratio	3:1 resin to hardener by volume
Aggregate Addition	Mineral chips and marble dust filler
Application Method	Trowelled and compacted
Finishing Sequence	Grind, fill pores and seal
Surface Character	Smooth polished mineral pattern
Typical Substrate	Prepared concrete
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

Use in dry healthcare circulation, pharmaceutical research corridors and public support areas requiring a decorative hard floor. A thin wearing course follows major substrate variations, so local leveling should be completed before laying the terrazzo rather than consuming the finish material to correct deep depressions.

Solutions for Your Application

The refurbishment cannot accept a thick new floor at doorways.

Plan the nominal 6 mm wearing layer with its substrate preparation and sealer, checking transitions before work starts.

Small pinholes remain visible after polishing.

Include the pore-filling stage between grinding operations so that the final seal covers a properly closed surface.

사용 가능한 옵션

Select fine aggregate proportions, matrix shade and sealer sheen from finished samples. Specify divider placement and curved perimeter details as part of the overall floor design.

Planning a Seamless Epoxy Terrazzo Flooring 6 mm Fine-Aggregate specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.