Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Formed around the room
The mortar can follow corners and local returns as part of the resin-floor installation rather than relying on separate lengths of trim.
STJH-SEAMLESS-EPOXY-COVE-BASE-H100-R19
Seamless Epoxy Cove Base 100 mm High with 19 mm Radius
An integral epoxy upstand creates a compact curved junction at the wall base.
- Approximately 100 mm upstand
- Compact 19 mm curve
- Integral trowelled epoxy mortar
About This Product
This cove is formed in place from epoxy mortar rather than fitted as a preformed strip. A primer bonds the mortar to the prepared vertical base, and grout and sealing coats close the surface. The approximately 100 mm height and 19 mm radius are suited to compact perimeter details where a substantial splash wall is unnecessary but an accessible floor junction is needed.
Key Features
Closed mortar surface
Grouting fills the fine pores left after trowelling, preparing the cove for a continuous final seal.
Floor-matched finish
A compatible coating allows the perimeter to share the floor's cleaning surface and chosen color.
Paramètres techniques
| Cove Material | Epoxy mortar |
|---|---|
| Nominal Height | Approximately 100 mm (4 in) |
| Nominal Radius | Approximately 19 mm (3/4 in) |
| Vertical Build Range | 1.6-6.4 mm, depending on mortar system |
| Bond Layer | Epoxy primer |
| Body Placement | Vertical trowel application |
| Pore Treatment | Grout coat |
| Final Finish | Compatible sealed resin surface |
| Connection | Integral with resin floor |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Applications
Use at laboratory perimeters, packaging rooms and clean storage areas with resin floors. The underlying wall base must be stable enough to support the rigid mortar; joints that accommodate building movement should remain functional rather than being filled solid with coving material.
Solutions for Your Application
Dirt remains in the sharp floor-to-wall angle.
Replace the exposed angle with a continuous formed radius and close any mortar pores before sealing.
The cove has uneven height along a long wall.
Establish the upper line before trowelling and use a consistent cove tool along the prepared perimeter.
Options disponibles
Specify the mortar build, finish color and top termination. Include internal corners, external returns and interruptions around plinths so that the cove remains consistent at the room's smaller details.
Planning a Seamless Epoxy Cove Base 100 mm High with 19 mm Radius specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
