STJH cured epoxy cove sample with 100 mm upstand, compact 19 mm radius and complete cut ends on white

STJH-SEAMLESS-EPOXY-COVE-BASE-H100-R19

Seamless Epoxy Cove Base 100 mm High with 19 mm Radius

An integral epoxy upstand creates a compact curved junction at the wall base.

Approximately 100 mm upstand
Compact 19 mm curve
Integral trowelled epoxy mortar

견적 요청 제품 찾아보기

About This Product

This cove is formed in place from epoxy mortar rather than fitted as a preformed strip. A primer bonds the mortar to the prepared vertical base, and grout and sealing coats close the surface. The approximately 100 mm height and 19 mm radius are suited to compact perimeter details where a substantial splash wall is unnecessary but an accessible floor junction is needed.

주요 기능

Formed around the room

The mortar can follow corners and local returns as part of the resin-floor installation rather than relying on separate lengths of trim.

Closed mortar surface

Grouting fills the fine pores left after trowelling, preparing the cove for a continuous final seal.

Floor-matched finish

A compatible coating allows the perimeter to share the floor's cleaning surface and chosen color.

기술 매개변수

Cove Material	Epoxy mortar
Nominal Height	Approximately 100 mm (4 in)
Nominal Radius	Approximately 19 mm (3/4 in)
Vertical Build Range	1.6-6.4 mm, depending on mortar system
Bond Layer	Epoxy primer
Body Placement	Vertical trowel application
Pore Treatment	Grout coat
Final Finish	Compatible sealed resin surface
Connection	Integral with resin floor
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

Applications

Use at laboratory perimeters, packaging rooms and clean storage areas with resin floors. The underlying wall base must be stable enough to support the rigid mortar; joints that accommodate building movement should remain functional rather than being filled solid with coving material.

Solutions for Your Application

Dirt remains in the sharp floor-to-wall angle.

Replace the exposed angle with a continuous formed radius and close any mortar pores before sealing.

The cove has uneven height along a long wall.

Establish the upper line before trowelling and use a consistent cove tool along the prepared perimeter.

사용 가능한 옵션

Specify the mortar build, finish color and top termination. Include internal corners, external returns and interruptions around plinths so that the cove remains consistent at the room's smaller details.

Planning a Seamless Epoxy Cove Base 100 mm High with 19 mm Radius specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.