STjh one-and-a-quarter-inch inlet steam injection humidifier with a medium separator and matching drain on white.

STJH-DIRECT-STEAM-INJECTION-HUMIDIFIER-114INLET

Direct Steam Injection Humidifier 1-1/4-Inch Inlet

A medium stainless separator body and manifold package for pharmaceutical and healthcare supply ducts.

1-1/4 in steam inlet
230 mm-class separator body
1-1/4 in condensate drain

Introduction de produit

The medium direct-injection unit increases the steam inlet to 1-1/4 in NPT and uses a larger internal separation chamber with a 230 mm-class body dimension. A matching 1-1/4 in drain connection handles separated condensate before dry steam enters the manifold. It serves greater duct humidity loads than the compact model while retaining corrosion-resistant 300-series stainless wetted construction.

Key Features

Larger separation chamber

The medium body provides more space to remove entrained moisture from the plant-steam stream.

Matched condensate outlet

A full 1-1/4 in drain connection supports reliable removal from the separator.

Clean-service stainless construction

300-series wetted parts suit pharmaceutical and healthcare air systems.

Paramètres techniques

Steam Inlet	1-1/4 in NPT
Drain Connection	1-1/4 in NPT
Body Cross-Section	230 mm N-dimension class
Wetted Material	300-series stainless steel
Steam Source	Conditioned plant steam
Separation	Integral internal moisture separation
Control	Modulating valve and actuator
Distribution	Duct manifold sized to width and output
Primary Duty	Medium clean-air humidification
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Applications

For medium pharmaceutical, hospital and controlled-production supply ducts with a suitable conditioned steam source.

Solutions for Your Application

A poorly trapped separator backs condensate into the steam manifold.Provide adequate drain head, correctly sized trap and gravity routing under all operating pressures.

The manifold is placed too close to a filter or elbow for complete absorption.Calculate non-wetting distance and reserve straight duct before downstream obstructions.

Options disponibles

Confirm steam pressure and quality, capacity, body orientation, valve, actuator, manifold count, trap, drain and duct absorption length.

Planning a Direct Steam Injection Humidifier 1-1/4-Inch Inlet specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe