STjh one-and-a-quarter-inch inlet steam injection humidifier with a medium separator and matching drain on white.

STJH-DIRECT-STEAM-INJECTION-HUMIDIFIER-114INLET

Direct Steam Injection Humidifier 1-1/4-Inch Inlet

A medium stainless separator body and manifold package for pharmaceutical and healthcare supply ducts.

1-1/4 in steam inlet
230 mm-class separator body
1-1/4 in condensate drain

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The medium direct-injection unit increases the steam inlet to 1-1/4 in NPT and uses a larger internal separation chamber with a 230 mm-class body dimension. A matching 1-1/4 in drain connection handles separated condensate before dry steam enters the manifold. It serves greater duct humidity loads than the compact model while retaining corrosion-resistant 300-series stainless wetted construction.

Ciri-ciri Utama

Larger separation chamber

The medium body provides more space to remove entrained moisture from the plant-steam stream.

Matched condensate outlet

A full 1-1/4 in drain connection supports reliable removal from the separator.

Clean-service stainless construction

300-series wetted parts suit pharmaceutical and healthcare air systems.

Parameter teknikal

Steam Inlet	1-1/4 in NPT
Drain Connection	1-1/4 in NPT
Body Cross-Section	230 mm N-dimension class
Wetted Material	300-series stainless steel
Steam Source	Conditioned plant steam
Separation	Integral internal moisture separation
Control	Modulating valve and actuator
Distribution	Duct manifold sized to width and output
Primary Duty	Medium clean-air humidification
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Applications

For medium pharmaceutical, hospital and controlled-production supply ducts with a suitable conditioned steam source.

Solutions for Your Application

A poorly trapped separator backs condensate into the steam manifold.Provide adequate drain head, correctly sized trap and gravity routing under all operating pressures.

The manifold is placed too close to a filter or elbow for complete absorption.Calculate non-wetting distance and reserve straight duct before downstream obstructions.

Pilihan yang boleh didapati

Confirm steam pressure and quality, capacity, body orientation, valve, actuator, manifold count, trap, drain and duct absorption length.

Planning a Direct Steam Injection Humidifier 1-1/4-Inch Inlet specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami