Anglais
Le portugais
espagnol
Le malais
Indonésien
Allemand
Le turc
Le vietnamien
FrançaisCurrent
russe
Arabe
Thaïlandais
Japonais
Coréen
Drainage de salle blanche, équipement d'hygiène et de sécurité
Détecteur de chaleur Cleanroompar
A sealed low-profile thermal detector for spaces where aerosols or process conditions make optical smoke sensing unsuitable.
- Fixed-Temperature or Rate-of-Rise
- Logement nettoyable à profil bas
- Addressable Status Reporting
- Sealed Ceiling Base
Introduction de produit
The cleanroom heat detector monitors ambient temperature with fixed-threshold, rate-of-rise or combined logic. Its smooth polymer head attaches to a gasketed wired base so the visible ceiling interface remains compact. Addressable variants identify the device and report alarm or fault status, while conventional variants connect to zone circuits using the same serviceable head-and-base arrangement.
Key Features
Smooth housing minimizes exposed recesses.
Twist-lock removal leaves wiring secured in the base.
Local LED and remote-indicator terminals simplify status checks.
Des solutions pour votre application
Some controlled spaces produce vapor or aerosols that can cause unwanted optical alarms but still require dependable fire detection.
Routine aerosols resemble smoke to an optical chamber.Thermal sensing responds to temperature behavior instead of airborne particles.
A high normal temperature can sit close to a generic alarm point.The detector class and threshold are selected for the actual ambient range.
Ceiling wiring should not be disturbed during head replacement.A removable sensing head connects to a permanently wired base.
Maintenance staff need quick alarm location.Device addressing and visible LED status identify the active detector.
Les applications typiques
Clean utility roomsProcess support spacesAreas with routine aerosolsControlled electrical rooms
Paramètres techniques
Typical housing and mounting values are listed below; thermal class and system compatibility are selected for the protected space.
| Matériaux de base | Flame-retardant polymer housing with stainless mounting plate and electronic thermistor |
|---|---|
| Panneau épaisseur | 2.0-3.0 mm molded housing wall |
| Largeur effective | 90-130 mm detector diameter |
| Longueur maximale | Up to 70 mm installed depth |
| Acier face épaisseur | 0.8-1.2 mm internal stainless mounting plate |
| Densité Core | 1200-1450 kg/m³ pour boîtier polymère |
| Conductivité thermique | 0.18-0.30 W/(m · K) pour boîtier polymère |
| surface finie | Smooth matte white cleanable housing |
| Type joint | Twist-lock thermal head on gasketed wired mounting base |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Fixed-temperature classRate-of-rise logicAddressable isolator baseRemote indicator
Planning a Cleanroom Heat Detector specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
