Inglês
Portuguêsatual
Espanhol
Língua malaia
Língua indonésia
Alemão
Língua turca
Vietnã
Francês
Língua russa
Língua árabe
Tailandês
Japonês
Coreano
Equipamentos de drenagem, higiene e segurança da sala limpa
Detector de calor de sala limpa
A sealed low-profile thermal detector for spaces where aerosols or process conditions make optical smoke sensing unsuitable.
- Fixed-Temperature or Rate-of-Rise
- Habitação Limpável de Perfil Baixo
- Addressable Status Reporting
- Sealed Ceiling Base
Introdução do produto
The cleanroom heat detector monitors ambient temperature with fixed-threshold, rate-of-rise or combined logic. Its smooth polymer head attaches to a gasketed wired base so the visible ceiling interface remains compact. Addressable variants identify the device and report alarm or fault status, while conventional variants connect to zone circuits using the same serviceable head-and-base arrangement.
Características-chave
Smooth housing minimizes exposed recesses.
Twist-lock removal leaves wiring secured in the base.
Local LED and remote-indicator terminals simplify status checks.
Soluções para sua aplicação
Some controlled spaces produce vapor or aerosols that can cause unwanted optical alarms but still require dependable fire detection.
Routine aerosols resemble smoke to an optical chamber.Thermal sensing responds to temperature behavior instead of airborne particles.
A high normal temperature can sit close to a generic alarm point.The detector class and threshold are selected for the actual ambient range.
Ceiling wiring should not be disturbed during head replacement.A removable sensing head connects to a permanently wired base.
Maintenance staff need quick alarm location.Device addressing and visible LED status identify the active detector.
Aplicações típicas
Clean utility roomsProcess support spacesAreas with routine aerosolsControlled electrical rooms
Parâmetros técnicos
Typical housing and mounting values are listed below; thermal class and system compatibility are selected for the protected space.
| Material principal | Flame-retardant polymer housing with stainless mounting plate and electronic thermistor |
|---|---|
| Painel de espessura | 2.0-3.0 mm molded housing wall |
| Largura efetiva | 90-130 mm detector diameter |
| Comprimento máximo | Up to 70 mm installed depth |
| Aço enfrentando espessura | 0.8-1.2 mm internal stainless mounting plate |
| Densidade Core | 1200-1450 kg/m³ para carcaça do polímero |
| Condutividade térmica | 0.18-0.30 W/(m · K) para carcaça polimérica |
| Superfície acabado | Smooth matte white cleanable housing |
| Tipo conjunto | Twist-lock thermal head on gasketed wired mounting base |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Fixed-temperature classRate-of-rise logicAddressable isolator baseRemote indicator
Planning a Cleanroom Heat Detector specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
