English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
Placement on shaped floors
The mortar consistency permits deliberate slope formation at approaches and local transitions that a free-flowing topping cannot easily hold.
STJH-HEAVY-DUTY-EPOXY-MORTAR-FLOORING-SC46
Heavy-Duty Epoxy Mortar Flooring 4–6 mm Power-Trowelled
A compacted epoxy screed for heavily used routes where the floor needs a substantial mineral wearing body.
- 4-6 mm compacted screed body
- Hand or power-trowel placement
- Suitable for designed falls and repair areas
About This Product
SC46 combines epoxy binder, hardener and graded aggregate into a trowelable mortar. Installed at 4-6 mm, the mixture is compacted by hand or power trowel and finished with a compatible seal. The construction can follow designed falls and local changes of level instead of flowing back to a flat surface. It is the general sealed mortar option in this family, without the separate traction broadcast of SR46.
الخصائص الرئيسية
Compacted aggregate skeleton
Trowelling closes the material around the mineral grains, supporting repeated mechanical loading when bonded to a sound base.
Sealed exposed surface
A compatible finishing coat closes residual mortar porosity and creates the face that cleaning equipment contacts in service.
المعلمات الفنية
| Binder System | Three-component epoxy screed |
|---|---|
| Nominal Thickness | 4-6 mm |
| Aggregate Form | Graded mineral aggregate |
| Placement Method | Hand or power trowel |
| Surface Construction | Compacted mortar with compatible seal |
| Finished Geometry | Flat areas, ramps and formed falls |
| Substrate | Prepared load-bearing concrete |
| Duty | Heavy internal industrial traffic |
| Edge Treatment | Compatible mortar cove or formed termination |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
Applications
Use for equipment transfer routes, heavy clean manufacturing aisles and repaired loading points. The mortar is particularly useful where surface shape needs to be retained. Wheel load, turning action and the strength of the original concrete should guide the extent of local repair beneath the new system.
Solutions for Your Application
A damaged aisle requires more than a thin protective film.
Repair unsound concrete and install the specified compacted mortar depth across the loaded route.
A smooth-flowing overlay would lose a carefully formed ramp.
Use trowelled placement to maintain the ramp geometry while consolidating the screed.
الخيارات المتاحة
Specify seal type, cove height and the intended fall profile. Large open areas may suit power-trowel placement, with hand finishing reserved for perimeters and obstructions.
Planning a Heavy-Duty Epoxy Mortar Flooring 4–6 mm Power-Trowelled specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
