Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại
Supported sheet bending
The former fills the space behind the curved vinyl, helping the surface retain its shape during cleaning and normal use.
STJH-HYGIENIC-PVC-COVE-SKIRTING-SC38
Hygienic PVC Cove Skirting 38 mm Former Self-Coved Vinyl System
The floor sheet itself continues around a supported curve and up the wall.
- 38 mm supported curve
- At least 100 mm upstand
- Continuous floor-sheet return
About This Product
This arrangement uses a solid PVC former to support the vinyl as it turns from the horizontal floor to a vertical upstand. The floor covering therefore remains continuous through the curve, rather than meeting a separate skirting foot at floor level. A two-part PVCu transition finishes the top where the upstand meets wall sheet, and welded corners complete changes in direction.
Các tính năng chính
Fewer low-level seams
Using the floor sheet through the radius avoids a separate longitudinal connection directly beside the wall at floor level.
Defined wall-sheet transition
The upper trim organizes the meeting point between the resilient floor upstand and the rigid wall covering.
Thông số kỹ thuật
| Cove Former | Solid PVC |
|---|---|
| Former Radius | 38 mm |
| Upstand Height | 100 mm minimum |
| Visible Covering | Continuous vinyl floor sheet |
| Top Transition | Two-part PVCu strip |
| Cove Attachment | Compatible contact adhesive |
| Corner Joints | Hot welded |
| Wall Interface | PVCu wall sheet |
| Sealing Detail | Compatible sealant at upper transition |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Applications
Consider for wet hygienic rooms, wash areas and healthcare support spaces where vinyl flooring meets a washable wall-sheet system. The selected sheet must be suitable for forming and welding, and the wall and floor preparation should allow continuous adhesive support around the curve.
Solutions for Your Application
An unsupported vinyl bend dents when cleaning equipment presses against it.
Install the solid former continuously so that the curved sheet has backing rather than an empty void.
The floor upstand and wall sheet terminate with an open ledge.
Use the two-part transition and complete the seal at the upper connection.
Các tùy chọn có sẵn
Select the floor sheet, wall-sheet thickness and compatible transition components as one detail. Provide corner geometry and desired upstand height so that the welding layout can be planned before cutting the sheet.
Planning a Hygienic PVC Cove Skirting 38 mm Former Self-Coved Vinyl System specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.
