English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
Supported sheet bending
The former fills the space behind the curved vinyl, helping the surface retain its shape during cleaning and normal use.
STJH-HYGIENIC-PVC-COVE-SKIRTING-SC38
Hygienic PVC Cove Skirting 38 mm Former Self-Coved Vinyl System
The floor sheet itself continues around a supported curve and up the wall.
- 38 mm supported curve
- At least 100 mm upstand
- Continuous floor-sheet return
About This Product
This arrangement uses a solid PVC former to support the vinyl as it turns from the horizontal floor to a vertical upstand. The floor covering therefore remains continuous through the curve, rather than meeting a separate skirting foot at floor level. A two-part PVCu transition finishes the top where the upstand meets wall sheet, and welded corners complete changes in direction.
الخصائص الرئيسية
Fewer low-level seams
Using the floor sheet through the radius avoids a separate longitudinal connection directly beside the wall at floor level.
Defined wall-sheet transition
The upper trim organizes the meeting point between the resilient floor upstand and the rigid wall covering.
المعلمات الفنية
| Cove Former | Solid PVC |
|---|---|
| Former Radius | 38 mm |
| Upstand Height | 100 mm minimum |
| Visible Covering | Continuous vinyl floor sheet |
| Top Transition | Two-part PVCu strip |
| Cove Attachment | Compatible contact adhesive |
| Corner Joints | Hot welded |
| Wall Interface | PVCu wall sheet |
| Sealing Detail | Compatible sealant at upper transition |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
Applications
Consider for wet hygienic rooms, wash areas and healthcare support spaces where vinyl flooring meets a washable wall-sheet system. The selected sheet must be suitable for forming and welding, and the wall and floor preparation should allow continuous adhesive support around the curve.
Solutions for Your Application
An unsupported vinyl bend dents when cleaning equipment presses against it.
Install the solid former continuously so that the curved sheet has backing rather than an empty void.
The floor upstand and wall sheet terminate with an open ledge.
Use the two-part transition and complete the seal at the upper connection.
الخيارات المتاحة
Select the floor sheet, wall-sheet thickness and compatible transition components as one detail. Provide corner geometry and desired upstand height so that the welding layout can be planned before cutting the sheet.
Planning a Hygienic PVC Cove Skirting 38 mm Former Self-Coved Vinyl System specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
