Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại
Hard aggregate selection
The mineral blend addresses abrasive contact in routes where scraping and concentrated wheel movement repeatedly attack the same floor strip.
STJH-HEAVY-DUTY-EPOXY-MORTAR-FLOORING-AO60
Heavy-Duty Epoxy Mortar Flooring 6 mm Aluminum-Oxide
A hard mineral mortar with a urethane-sealed face for routes exposed to concentrated abrasion and repeated impact.
- Aluminum-oxide-bearing aggregate blend
- Nominal 6 mm trowelled body
- Separate urethane surface sealer
About This Product
AO60 contains aluminum-oxide aggregate within an amine-cured epoxy mortar and is installed at a nominal 6 mm. The dense body is trowelled into place before a chemically resistant urethane sealer is applied. Unlike a thin epoxy coating, its coarse mineral structure remains visible through a cut edge. The sealer is part of the system, helping close mortar surface pores rather than replacing the load-bearing body.
Các tính năng chính
Two material functions
Epoxy mortar provides the body while the urethane finish supplies the exposed cleaning face, keeping these layers distinct in maintenance planning.
Consolidated perimeter work
Hand finishing around columns and equipment bases helps avoid open mortar edges at locations that cleaning tools must reach.
Thông số kỹ thuật
| Resin | Epoxy with amine curing agent |
|---|---|
| Aggregate | Aluminum oxide with fine mineral aggregate |
| Nominal Thickness | 6 mm |
| Ứng dụng | Trowel-applied mortar |
| Surface Sealer | Chemical-resistant urethane |
| Mortar Form | Four-component formulation |
| Reference Shore D | 90-93 for cured reference mortar |
| Standard Colour Family | Steel or charcoal grey |
| Base Condition | Dry, mechanically prepared substrate |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Applications
Intended for heavily used production routes, equipment handling points and clean industrial support zones. It suits locations where rolling and scraping exposure outweigh the need for a thin decorative coating. Any requirement for full waterproofing should be addressed as a separate compatible system layer.
Solutions for Your Application
Repeated steel-wheel traffic is wearing through ordinary coatings.
Use a full-depth hard-aggregate mortar over repaired concrete and keep transition edges properly supported.
Unsealed mortar could collect residue in surface pores.
Include the urethane sealing stage and renew worn local areas before the mortar becomes exposed.
Các tùy chọn có sẵn
Coordinate cove returns and floor transitions with the mortar depth. Choose the appropriate grey shade and discuss a compatible waterproofing layer where the complete construction must contain liquid.
Planning a Heavy-Duty Epoxy Mortar Flooring 6 mm Aluminum-Oxide specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.
