STjh compact 2 by 2 foot explosion-proof ULPA FFU with cast motor enclosure and top access panel

STJH-EXPLOSION-PROOF-FFU-2X2-TOPSIDE

Fan Filter Unit 2 × 2 ft Top-Side Explosion-Proof

A compact stainless ULPA module for small hazardous-location clean enclosures with top-side service.

2 x 2 ft compact footprint
Top-side ULPA filter access
Hazardous-location motor enclosure

Giới thiệu Sản phẩm

The 2 x 2 ft model is the smallest accepted footprint in this hazardous-location FFU family. Its 23.72 x 23.63 x 19.86 in stainless housing uses top-side ULPA access and a non-sparking motor in a cast-iron explosion-proof enclosure. The unit is organized around the manufacturer's NEC Class I/Class II, Division 1 family construction; suitability for a specific classified area still depends on the complete ordered configuration and site requirements.

Các tính năng chính

Small classified-area format

The square footprint serves compact process enclosures and ceiling bays where a longer unit is unnecessary.

Protected drive assembly

A non-sparking motor is housed in a cast-iron explosion-proof enclosure as part of the cited hazardous-location family.

Top-side maintenance path

The ULPA stage is serviced from above, separating routine access from the clean-air discharge face.

Thông số kỹ thuật

Nominal Module Size	2 x 2 ft
External Dimensions	23.72 x 23.63 x 19.86 in
Housing Material	Stainless steel
Final Filter	ULPA
Filter Access	Top side
Electrical Input	120/240 V, single phase, 50/60 Hz
Motor Construction	Non-sparking motor in cast-iron explosion-proof housing
Hazardous-Location Family Basis	NEC Class I/Class II, Division 1 construction
Airflow Direction	Filtered positive-pressure supply
Tùy chỉnh	Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động.

Applications

Intended for compact hazardous dispensing enclosures, solvent-handling clean zones and small classified ceiling bays requiring filtered positive-pressure supply. The area classification, wiring method, seals and complete equipment assembly must be evaluated together for the actual site.

Solutions for Your Application

A standard cleanroom FFU does not address the electrical hazards of the classified area.Use a configuration based on the cited hazardous-location family and have the complete installed system evaluated for the specific area classification.

Room-side filter access could disrupt the small controlled enclosure.Reserve a safe top-side service route for ULPA replacement and motor access.

Các tùy chọn có sẵn

Confirm the classified-area basis, voltage, wiring and isolator arrangement, ULPA seal, stainless finish and ceiling connection. Do not select the module independently from the complete hazardous-location installation.

Planning a Fan Filter Unit 2 × 2 ft Top-Side Explosion-Proof specification?

Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.

Nói chuyện với đội ngũ của chúng tôi