Tiếng Anh
Tiếng Đức, tiếng Đức
Tiếng Ả Rập, tiếng Ả Rập
Tiếng Pháp, tiếng Pháp
Tiếng Indonesia (tiếng Việt)
Tiếng Nhật
Tiếng Hàn / tiếng Hàn
Tiếng Mã Lai
Tiếng Bồ Đào Nha, tiếng Bồ Đào Nha
Tiếng Nga, tiếng Nga
Tiếng Tây Ban Nha, tiếng Tây Ban Nha
Tiếng Thái (tiếng Thái)
Tiếng Thổ Nhĩ Kỳ, tiếng Thổ Nhĩ Kỳ
Tiếng Việt / tiếng ViệtHiện tại
Dense contact surface
The filled resin closes the exposed concrete surface, reducing places where routine tracked dirt can collect between cleaning cycles.
STJH-EPOXY-SELF-LEVELING-FLOORING-SMOOTH-2MM
Epoxy Self-Leveling Flooring 2 mm Smooth
A rigid, fine-filled epoxy topping for dry production floors where a smooth surface supports everyday cleaning.
- Nominal 2 mm wearing system
- Fine quartz incorporated into the resin
- Smooth gloss finish for dry working areas
About This Product
The SMOOTH-2MM model combines a bonded epoxy primer with a self-smoothing wearing course. Fine quartz is dispersed within the resin rather than scattered across the exposed face, giving the cured floor a continuous gloss appearance. Its shallow build suits sound concrete that already has the required falls and flatness. This is the straightforward smooth version for clean industrial traffic, with no resilient cushion or decorative aggregate surface.
Các tính năng chính
Controlled application depth
A notched trowel or pin rake spreads the mix, followed by a spiked roller to release entrapped air before cure.
Predictable floor geometry
The thin bonded overlay preserves existing room levels when substrate defects are repaired before the topping is placed.
Thông số kỹ thuật
| Resin Type | Two-component epoxy |
|---|---|
| Nominal Thickness | 2 mm |
| Filler | Fine quartz, 0.1-0.3 mm |
| System Layers | Epoxy primer and self-smoothing topping |
| Kết thúc bề mặt | Smooth gloss |
| Installation Method | Notched trowel or pin rake; spiked roller |
| Suitable Base | Prepared concrete or cement screed |
| Traffic Duty | Medium to heavy internal wear |
| Application Temperature | 10-35 °C |
| Tùy chỉnh | Có sẵn dựa trên ứng dụng dự định và môi trường hoạt động. |
Applications
Suitable for dry assembly rooms, pharmaceutical support areas and enclosed material corridors. Choose this version when cleaning access and rolling movement matter more than a coarse traction profile. Existing movement joints should continue through the finish so the topping is not asked to restrain slab movement.
Solutions for Your Application
Small holes in the slab may leave visible pinholes in the new finish.
Fill exposed voids and establish a continuous primer before placing the smooth topping.
The purchaser needs a cleanable floor without raising thresholds substantially.
Use the nominal 2 mm build and detail each doorway against the measured adjoining floor level.
Các tùy chọn có sẵn
Specify a practical solid colour, matching cove treatment and transition detail. For persistently wet routes, request a separately selected traction system instead of changing this smooth model during installation.
Planning a Epoxy Self-Leveling Flooring 2 mm Smooth specification?
Gửi cho chúng tôi kích thước của bạn, điều kiện lắp đặt, mục tiêu hiệu suất và bề mặt yêu cầu hoàn thiện.
